1K P Galvin, E Doroodchi, A M Callen, et al. Pratten.Pilot plant trial of the reflux classifier. Minerals Engineering 2002 (1-2)
2G NGUYENTRANLAM, K P GALVIN. PARTICLE CLASSIFI CATION IN THE REFLUX CLASSIFI-ER. Minerals Engineering,2001(9)
3E Doroodchi, J Zhou, D F Fletcher, etal. Particle size classification in a fluidized bed containing parallel inclined plates. Minerals Engineering, 2006(2)
4Giang Nguyentranlam, Kevin P Galvin. Applications of the Reflux Classifier in solid-liquid operations. Minerals Engineering,2004(2 - 4)
5K P Galvin, A Callen, J Zhou, et al. Performance of the retluxclassifier for gravity separation at full scale. Minerals Engineering,2005(1)
6Galvin K P, Pratten S J, Nicol S K. Dense medium separation using a teetered bed separator. Minerals Engineering, 1999 (9)
7J Zhou, K Walton, D Laskovski, et al. Enhanced separation of mineral sands using the Reflux Classifier. Minerals Engineering,2006(15)
8D Laskovski, P Duncan. P Stevenson, et al. Segregation of hyraulically suspended particles in inclined channels. Chemical Engineering Science, 2006(22)
9E Doroodchi. K P Galvin. D F Fletcher. The influence of inclined plates on expansion behaviour of solid suspensions in a liquid fluidised bed-a computational fluid dynamics study. Powder Technology. 2005(1)
3[1]Tao D, Richardson P E, Yoon R H. Effect of oxidation on the hydrophobicity of coal pyrite[A]. In: Proc. of International Conference on Coal Science. Ed. by Michaelian[C]. Banff, Alberta, Canada, 1993.325～328.
4ALISTER S M, Selecting batch-type, fluidized bed enhanced gravity concentrating equipment [R]. http://www, concentrators, net/SB_ teehpapers, html.2002.
5SPRAKE C. Falcon fine recovery[R], http.//www.concentrators, net/C_techpapers, html, 1998.
6HUANG Li-ming. Upgrading of gold gravity concentrates: a study of the knelson concentrator [D].McGill University, 1997.
7MCALISTER S A. Centrifugal concentrator: American, 04,824,431[P]. 1989-04-25.
8LING Jing-hong. A study of variable-speed 3-in Knelson concentrator[D]: Ph. D Thesis. Montreal:McGill University, 1998.
9WITTEVEEN H J. The response of a uniform jig bed in terms of the porosity distribution[D]: Delft:Delft University of Technology, 1995.
10ZHAO Y, WEN X, LI B, et al. Recovery of copper from waste printed circuit board[J]. Minerals and Metallurgical Processing, 2004,21(2) : 99-102.
