摘要
通过三类弯管形式压损试验，发现了短半径弯头在一个较大料气输送比范围内均产生最小压损；实验数据和理论数据对比分析表明，理论模型计算压损值明显偏大。最后通过设置不同终端条件试验，验证了终端条件对系统工作性能影响。
By means of the pressure loss in three kinds of bend configuration. it is found out that the short radius elbows appear to yield the lowest pressure loss in a wide range of mass over air ratio. The comparison between the experimental and theoretical data shows that the pressure loss results in the theoretical models are a bit on the higher side. Finally. different end conditions are given to test the impact of the end condition on the performance of the pneumatic conveying system.
出处
《水泥工程》
CAS
1997年第1期9-12,共4页
Cement Engineering
关键词
气力输送
流动
水泥
运输设备
Pneumatic conveying Bend Pressure loss End condition
