摘要
针对大功率低腔压激光器研制了利用喷流引射原理形成低气压密封的引射式气动窗口,并进行了密封性能实验和光束质量测试。对现有模型的实验研究结果表明,单纯使用喷流引射作用,可使密封压力接近0.1atm,而且引射气流的引入未使光轴中心发生漂移或偏转,输出光强分布也基本无变化。当辅以抽真空时,密封压力可降至66.65Pa。
For high power laser of low cavity pressure, a new type of aerodynamic window using jet injection is researched and produced. Experimental study shows that for a φ6.5 mm free aperture, by only using jet injection the sealing pressure can achieve about 0.1 atmophere and the flow of jet injection has no considerable influence on the intensity distribution of the laser beam. As both jet injection and suction are used the sealing pressure can drop down till 66. 5 Pa. The experiment also shows that the sealing pressure can be easily adjusted and stabilized.
出处
《中国激光》
EI
CAS
CSCD
北大核心
1997年第2期113-117,共5页
Chinese Journal of Lasers
基金
国家高技术863-410强激光技术课题资助
关键词
大功率激光器
气动窗口
喷液引射
high power laser, aerodynamic window, jet injection