摘要
The ideal formula for chevkinite can be expressed as A4BC2D2Si4O22. It is important to determine the valence state and site occupation proportions for Fe among the B, C, and D octahedral sites as it may help to identify different species in the chevkinite group. Non-metamict chevkinite-（Ce） from Mianxi alkali feldspar-granite, Sichuan Province, China, was investigated using Moessbauer spectroscopy. The Fe^3＋/∑Fe ratio was 39.2%. A significant increase of Fe^3＋ occured during metamictization and annealing for chevkinite-group minerals. In metamict samples Fe tended to lower coordination, According to the correlation between bond length and isomer shift （IS）, the quadrupole doublets with IS = 1.10 and 0.94 mm·s^-1 can be assigned to Fe^2＋ in the B and C octahedral sites, respectively. Based on the correlation between octahedral distortion and quadrupole splitting （QS）, the quadrupole doublets with QS = 0.86 and 0.77 mm·s^-1 can be assigned to Fe^3＋ in the C and D sites, respectively. The simplified formula can be revised as： Ce4Fe^2＋ （Ti, Fe^2＋, Fe^3＋ ）2（Ti, Fe^3＋ ）2Si4（O,OH）22. It indicated that the non-metamict chevkinite-（Ce） belonged to Fe^2＋ end member of the chevkinite group because Fe^2＋ was the predominant component in the B site.
The ideal formula for chevkinite can be expressed as A4BC2D2Si4O22. It is important to determine the valence state and site occupation proportions for Fe among the B, C, and D octahedral sites as it may help to identify different species in the chevkinite group. Non-metamict chevkinite-（Ce） from Mianxi alkali feldspar-granite, Sichuan Province, China, was investigated using Moessbauer spectroscopy. The Fe^3＋/∑Fe ratio was 39.2%. A significant increase of Fe^3＋ occured during metamictization and annealing for chevkinite-group minerals. In metamict samples Fe tended to lower coordination, According to the correlation between bond length and isomer shift （IS）, the quadrupole doublets with IS = 1.10 and 0.94 mm·s^-1 can be assigned to Fe^2＋ in the B and C octahedral sites, respectively. Based on the correlation between octahedral distortion and quadrupole splitting （QS）, the quadrupole doublets with QS = 0.86 and 0.77 mm·s^-1 can be assigned to Fe^3＋ in the C and D sites, respectively. The simplified formula can be revised as： Ce4Fe^2＋ （Ti, Fe^2＋, Fe^3＋ ）2（Ti, Fe^3＋ ）2Si4（O,OH）22. It indicated that the non-metamict chevkinite-（Ce） belonged to Fe^2＋ end member of the chevkinite group because Fe^2＋ was the predominant component in the B site.
基金
Project supported by the National Natural Science Foundation of China (40572029)
