摘要
通过改进铝基化学镀的前处理工艺,采用酸蚀法对铝进行前处理,在铝基上直接进行化学镀Ni-P合金,可以获得光亮、平整、结合力好的镀层。通过实验确定了铝基化学镀Ni-P合金的工艺流程,并讨论了各因素对镀层沉积速率的影响。
Pretreatment technology for electroless plating on aluminum substrate was improved. Electroless Ni-P alloy plating was conducted immediately after a special acid pickling step for the aluminum substrate, and a bright, smooth and good adhesion Ni-P alloy coating was obtained on the aluminum substrate. A technological process for electroless Ni-P alloy plating on aluminum substrate was established through experiments. Effect of various factors on deposition rate of the coating was discussed as well.
出处
《电镀与精饰》
CAS
2007年第3期42-44,共3页
Plating & Finishing
关键词
铝基材
化学镀Ni—P
酸蚀法
aluminum substrate
electroless Ni-P plating
acid pickling