期刊文献+

黑Cr-C纳米复合电沉积工艺中电流密度的确定 被引量:2

Determination of Proper Current Density in Black Cr-C Nano-Composite Electrodeposition
下载PDF
导出
摘要 研究了电流密度对黑Cr-C纳米复合镀层组织及性能的影响。通过扫描电镜(SEM)观察复合镀层的表面形貌,并测定了镀层的显微硬度。结果表明,黑Cr-C纳米复合镀层显微硬度最高达10.5 GPa,镀层中微粒的体积分数最高达8.12%,电沉积复合电镀最佳电流密度为100 A/dm2。 The influence of current density on the microstructure and properties of black Cr-C nano-composite coatings is investigated. The morphology of the composite coatings is observed by scanning electron microscope (SEM) and the microhardness of coatings is evaluated. The results show that the maximum micrehardness of black Cr-C nano-composite coating is 10.5 GPa; the maximum volume fraction of particle in nano-composite coating is 8.12% ; and its optimum current desnity is 100 A/dm^2 .
出处 《电镀与环保》 CAS CSCD 2007年第3期17-18,共2页 Electroplating & Pollution Control
基金 长春工业大学科技发展基金项目2006001
关键词 黑Cr-C纳米复合镀层 形貌 显微硬度 black Cr-C nano-composite coating morphology micrehardness
  • 相关文献

参考文献8

  • 1蒋斌,徐滨士,董世运,王红美.纳米复合镀层的研究现状[J].材料保护,2002,35(6):1-3. 被引量:89
  • 2Shrestha N K,Sakurada K,Masuko M,et al.Composite Coatings of Nickel and Ceramic Particles Prepared in Two Steps[J].Surface Coatings and Technology,2001,140(2):175-181.
  • 3李卫东,周晓荣,左正忠,周运鸿.电沉积复合镀层的研究现状[J].电镀与涂饰,2000,19(5):44-49. 被引量:35
  • 4Garcia I,Fransaer J,Celis J P.Electrodeposition and Sliding Wear Resistance of Nickel Composite Coatings Containing Micron and Submicron SiC Particles[J].Surface Coatings and Technology.2001(148):171-178.
  • 5谭澄宇,梁英,夏长清,郑子樵.Ni/SiO_2复合电镀层高温氧化性能的研究[J].表面技术,2000,29(6):16-19. 被引量:17
  • 6Kim S K,Yoo H J,Formation of Bilayer Ni-SiC Composite Coatings by Electordeposition[J].Surface Coatings and Technology.1998(109):564-569.
  • 7Shrestha N K,Masuko M,Saji T.Composite Plating of Ni/SiC Using Azo-Cationic Surfactants and Wear Resistance of Coatings[J].Wear,2003(254):555-564.
  • 8周绍民.金属电沉积原理与研究方法[M].上海:上海科学技术出版社,1998.

二级参考文献39

共引文献129

同被引文献20

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部