摘要
研究了氧化铝陶瓷注射成型工艺过程,包括粘结剂的选择、粉末装载量的确定及热脱脂工艺的研究。探讨了注射压力、注射温度和模具温度等注射成型工艺参数对试样性能的影响,得到了一条优化的氧化铝注射成型工艺路线。
The process of alumina ceramic injection molding was investigated parameters such as the choice of binder system, the powder loading and the debinding And, the effect of the injection molding parameters such as the molding pressure, mold temperature on the performances of samples was discussed. Finally, a successful for the alumina ceramic was obtained. thoroughly. The mixing technology were studied. molding temperature and injection molding process
出处
《中国陶瓷》
CAS
CSCD
北大核心
2007年第5期14-18,共5页
China Ceramics
基金
天津市自然科学基金
编号:05YFJMJC04800
关键词
氯化铝
注射成型
粘结利
脱脂
Alumina, Ceramic Injection Molding, binder, debinding
