Energy Dissipation and Apparent Viscosity of Semi-solid Metal during Rheological Processes PartⅠ: Energy Dissipation
被引量:1
Energy Dissipation and Apparent Viscosity of Semi-solid Metal during Rheological Processes PartⅠ: Energy Dissipation
参考文献16
1 [1]K.P.Young and M.C.Flemings:Metals Tech.,1979,6(4),130.
2 [2]X.F.Pan,H.F.Zhang and A.M.Wang:J.Mater.Sci.Technol.,2000,16(5),453.
3 [3]I.Diewwanit and M.C.Flemings:Proc of the 4th Int.Conf.on Semi-solid Processing of alloys and Compostes,UK,June 19th-21th,1996,30-34.
4 [4]M.Mada and F.Ajersch:Mater.Sci.Eng.,1996,A212,171.
5 [5]H.B.Dong and Y.L.Kang:J.Mater.Sci.Technol.,2003,19(Supl.),62.
6 [6]Xiaobao ZHAO:Fluid Mechanics in Engineering,Southeast University Press,Nanjing,2004,94-95.(in Chinese)
7 [7]Wenjuan XU:Fluid Mechanics,Harbin Institute of Technology Press,Harbin,2002,100-121.(in Chinese)
8 [8]W.M.Mao,Z.S.Zhen and S.J.Yan:J.Mater.Sci.Technol.,2004,20(5),580.
9 [9]J.Happel and H.Brenner:Low Reyholds Number Hydrodynamics,2nd ed.Noord Hoff,Leyden,1973.
10 [10]A.S.Kuwabara:J.Phys.Sci.Soc.Jpn.,1979,14,
同被引文献10
1 邢书明,李楠,郭文龙.近净形高品质铸件流变成形技术进展[J] .特种铸造及有色合金,2008,28(S1):25-28. 被引量:5
2 王震,杨洋,陆瑶.铝合金轮毂强力旋压的研究[J] .硅谷,2008,1(13). 被引量:6
3 邢书明,张励忠,谭建波,鲍培玮,张海英.半固态流变成形工艺理论——第2部分 流变补缩理论[J] .特种铸造及有色合金,2006,26(4):215-219. 被引量:5
4 Xing S, Bao P, Li N, et al. Modified rheological process- ing technology and its applications in iron and steels[J ]. Transactions of Nonferrous Metals Society of China: Eng- lish Edition, 2010,20($3) : 993 - 997.
5 Ji S, Wang Y, Watson D. Mierostruetural evolution and solidification behavior of A1-Mg-Si Alloy in high-prexsure die castiag[J]. Metallurgical and Materials Transactions, 2013, 44(7) .3185 - 3197.
6 杨奋飞,刘智冲,岳铁,谢理光.铝合金轮毂制造业的现状与发展趋势[J] .铸造工程,2009(4):35-38. 被引量:8
7 张海渠,马桂艳,宋鸿武,张士宏.铝合金轮毂成形工艺的应用与研究进展[J] .沈阳大学学报,2011,23(4):1-4. 被引量:19
8 任学平,李贺军.液态模锻件的致密机制[J] .兵器材料科学与工程,1991,14(8):15-17. 被引量:3
9 李婷.铝合金在汽车车轮上的应用[J] .模具制造,2013,13(5):77-82. 被引量:2
10 李俊文,赵海东,吴朝忠.A356铝合金挤压铸造界面传热系数的研究[J] .特种铸造及有色合金,2014,34(3):269-272. 被引量:6
二级引证文献4
1 邢书明.挤压铸造合金材料及其工艺性能[J] .铸造,2015,64(7):628-631. 被引量:11
2 谭建波,李立新.保持时间对半固态铸-锻6061合金成分偏析的影响[J] .特种铸造及有色合金,2017,37(8):853-855.
3 姜巨福,李明星,王迎.铝合金挤压铸造技术研究进展[J] .中国有色金属学报,2021,31(9):2313-2329. 被引量:20
4 杨茜,尹甜甜.基于低压浇注及协调施压的车轮液态模锻模具设计[J] .锻压技术,2023,48(6):171-175.
1 陈幼筠,陈忠家,王雪英,谢元福.ZK60镁合金的热变形流变行为与本构方程[J] .金属功能材料,2017,24(1):25-31. 被引量:12
2 Wen LIU Shuming XING Peiwei BAO Milan ZHANG Liming XIAO.Energy Dissipation and Apparent Viscosity of Semi-solid Metal during Rheological Processes PartⅡ:Apparent Viscosity[J] .Journal of Materials Science & Technology,2007,23(6):801-805. 被引量:1
3 邵元智,杨金凤.超高强铝合金LC9超塑性流变过程中的动态再结晶研究[J] .机械工程材料,1989,13(6):14-16.5.
4 Chen Xiaoyang, Mao Weimin, Zhong Xueyou School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083.RHEOLOGICAL PROPERTIES OF SEMI-SOLID Al-Si ALLOY IN SOLID-LIQUID ZONE[J] .中国有色金属学会会刊:英文版,1997,7(4):31-34.
5 罗迎社,胡云贵,李苏洋,李颂文.金属热流变成形的有限元数值模拟[J] .湘潭大学自然科学学报,1999,21(4):33-37.
6 QIU han-quan,CHEN Zheng-de.The forty years of vermicular graphite cast iron development in China (Part Ⅰ)[J] .China Foundry,2007,4(2):91-98. 被引量:4
7 QIU han-quan,CHEN Zheng-de.The forty years of vermicular graphite cast iron development in China(Part Ⅲ)[J] .China Foundry,2007,4(4):261-269.
8 陈威,高一翔,朱磊.半固态加工模具表面强化与修复[J] .锻造与冲压,2012(13):20-20.
9 周勋,寇宏超,白洁,王军,李金山,周廉.初生纳米晶对Ti_(40)Zr_(25)Ni_8Cu_9Be_(18)非晶合金结构稳定性的影响[J] .中国有色金属学报,2012,22(12):3416-3420. 被引量:1
10 Jiang Yunxi Xie Shuisheng Li Xinggang Li Lei.Influence of Procedure Parameters on Rheological Property of Semi-Solid AZ91D Magnesium Alloy[J] .Journal of Rare Earths,2004,22(z2):47-49. 被引量:2
;