摘要
利用扫描电镜，结合计算机有限元计算研究了残余奥氏体对30CrMn2Si铸钢耐磨性影响。结果表明：在两体磨损条件下．残奥量为26％时耐磨性能最好；在三体冲击磨损条件下，冲击功为1．oJ，残奥在2．6％时耐磨性能最好；冲击功为4.OJ，残奥为2．25%时耐磨性能最好。二体磨损以犁沟和切削机制为主，三体磨损时磨损以凿削、疲劳机制为主。
The effects of retainetd austenite (AR ) on wear- resistance of 3oCrMn2Si steel have been investigate-cl by means of SPM and computer. The results show that wear- rcslstance is highest with 2. 6 % AR under the condi-tion of two- body wear. The wear- reslstance is lnghest with AR(2. 6 %and l J impacl energy,AR2' 25 % and 4J impactenergy respectively under the condition of three - body wear.
出处
《热加工工艺》
CSCD
北大核心
1997年第2期3-5,共3页
Hot Working Technology
