摘要
用5kw连续CO2激光器在40Cr钢基材表面对不同成分的镍基WC合金热喷涂层进行激光重熔，研究了WC和CeO2加入量对激光熔覆层显微组织和耐蚀性能的影响、结果表明，添加适量WC和CeO2可以改善激光熔覆镍基自熔合金层的耐蚀性能。
Several nikel-base WC composite alloy with various Ceo2 content were remelted by means of a 5 kWcontinuous wave CO2 laser on the substrate of steel 40Cr. The effect of WC and CeO2 content on the microstruture andcorrosion resistance of laser remelted c0atings was studied. As a result,adding proper content of WC and CeO2 in thealloy powder and laser remelting can not only modify the microstructure but also improve the corrosion resistance ofthe coatings remarkably.
出处
《热加工工艺》
CSCD
北大核心
1997年第2期8-10,共3页
Hot Working Technology
