期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

强烈淬火:改善了硬度和残余应力(英文) 被引量：3

Intensive Quenching:Improved Hardness and Residual Stress
下载PDF
导出
摘要 通过数值模拟和试验研究结果确定使用强烈淬火方法在表面形成最佳压应力,根据这些结果,提出了改善零件的热处理和设备的一些建议。除了探讨最大表面压应力的形成外,对使用可控淬透性钢的优点也进行了讨论。 Numerical simulation and experimental results of investigations conducted to determine the formation of optimal surface compressive stresses using intensive quenching methods. Based on these results, recommendations are provided for the improvement of heat treatment of machine parts and equipment. In addition to the formation of maximum surface compressive stresses, advantages of using controlled-hardenability steels are also discussed.
作者 N.I.Kobasko G.E.Totten L.C.F.Canale
机构地区 Intensive Technologies Ltd Department of Mechanical and Materials Engineering Departamento de Materiais
出处 《金属热处理》 CAS CSCD 北大核心 2007年第5期84-89,共6页 Heat Treatment of Metals
关键词 强烈淬火 残余应力 表面压应力 硬度 数值模拟 热处理 淬透性 面形
分类号 TG161.3 [金属学及工艺—热处理]
  • 相关文献

参考文献31

  • 1NI Kobasko,Steel quenching in liquid media under pressure.(in Russian:Zakalka stali v zhidkikh sredakh pod davleniem),206 p.,Naukova dumka,Kiev,1980.
  • 2NI Kobasko,NI Prokhorenko,(1964),Cooling rate effect of quenching on crack formation in 45 steel,Metallovedenie i termicheskaya obrabotka metallov (MiTOM).No.2,pp.53-54.
  • 3NI Kobasko,WS Morhuniuk,Investigation of thermal and stress-strain state at heat treatment of power machine parts (in Russian:“Issledovanie teplovogo i napryagenno-deformirovannogo sostoyaniya pri termicheskoy obrabotke izdeliy energomashinostroyeniya”),16 p.,Znanie,Kiev,1983.
  • 4NI Kobasko,WS Morhuniuk,VV Dobrivecher,“Tandem-Analysis”,a customized software package applicable to the process design of intensive quenching processes and is available commercially from Intensive Technologies Ltd,(managers@itl.kiev.ua,www.itl.kiev.ua)
  • 5NI Kobasko,WS Morhuniuk,Investigation of thermal stress state in the case of heat treatment of power machine parts (in Russian:“Issledovanie teplovogo i napryagennogo sostoyaniya izdeliy energomashinostroyeniya pri termicheskoy obrabotke”),16 p.,Znanie,Kiev,1981.
  • 6NI Kobasko,(1970),Crack formation at steel quenching,MiTOM,No.11,pp.5-6.
  • 7JuM Bogatyrev,KZ Shepelyakovskii,IN Shklyarov,(1967) Cooling rate effect on crack formation at steel quenching,MiTOM,No.4,pp.15-22.
  • 8RF Ganiev,NI Kobasko,KV Frolov,(1987) On principally new ways of increasing metal part service life,Doklady Academii Nauk (DAN) USSR,Vol.194,No.6,pp.1364-1473.
  • 9NI Kobasko,(1986) Increase of service life of machine parts and tools by means of cooling intensification at quenching,MiTOM,No.10,pp.47-52.
  • 10NI Kobasko,BI Nikolin,AG Drachinskaya,(1987) Increase of service life of machine parts and tools by creating high compression stresses in them,Izvestija VUZov (Machinostrojenie),No.10,pp.157-157.

同被引文献24

引证文献3

二级引证文献11

金属热处理
2007年 第5期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部