期刊文献+

板带钢卷取机摩擦衬板的镶嵌式固体润滑材料研究 被引量:3

Study on mosaic-type solid lubricating materials for friction lining board in slab-strip steel coilers
下载PDF
导出
摘要 介绍了板带钢卷取机卷筒棱锥轴与扇形块之间镶嵌式摩擦衬板固体润滑材料研究。根据板带钢卷取机卷筒的摩擦衬板的实际工况要求,选用聚四氟乙烯(PTFE)、二硫化钼和石墨作为固体润滑材料,通过正交试验法,确定了锡青铜摩擦衬板的镶嵌固体润滑材料的种类及组分配比。研究表明,镶嵌固体润滑材料的锡青铜摩擦衬板的摩擦系数明显降低,并使其耐磨性提高两个数量级以上,而且没有发生严重的磨损失效现象,完全可以满足卷取机的工作要求。 The article shows the study on the mosaic-type solid lubricating material for friction lining board used between the pyramid axis and sector of slab - strip steel coilers. Based on the practical operation of the friction lining board, PTFE, supramoly and graphite are chosen as the solid materials. Through an orthogonality experimentation, the kinds and mixture ratio for the material for such tin - bronze friction lining board are determined. The research demonstrates that the friction coefficient of this tin - bronze lining board is not only obviously low, but the wearing resistance could enhance more than two orders of magnitude as well. And, no serious failure happens. The results show that the material can fully meet the requirements of the coilers.
作者 刘朝红 黄括
机构地区 辽宁科技学院
出处 《重型机械》 2007年第3期9-12,共4页 Heavy Machinery
基金 辽宁省教育厅高等学校科学研究项目(20222091)
关键词 镶嵌式固体润滑 模拟试验 摩擦衬板 正交试验法 耐磨性 mosaic - type solid lubrication ~ simulation test friction lining board orthogonality experimenta- tion wearing resistance
  • 引文网络
  • 相关文献

参考文献12

  • 1陶江,李同生,李伟麟.镶嵌用固体润滑剂对锡青铜轴承摩擦学性能影响的研究[J].固体润滑,1991,11(2):120-128. 被引量:3
  • 2P. Thomas, Feature Bonded Coatings for the Reduction of Friction and Wear [ J ]. Industrial Lubrication and Tribology, 1998, 50(6).
  • 3Billett, M. G. Industrial Lubrication [ M], Pergamon Press, 1982.
  • 4A. Jackson. Simplified EHL Calculations for bearings [J], Machine design, 1980, 152(13).
  • 5A. R. Lansdown. Lubrication a practical guide to lubricant selection[ M ], Pergamon Press, 1982.
  • 6Campbell M, Hopkins V. Development of Polyimide Bonded Solid Lubricants [ J ], Lubricantion Engineering Journal of the American society of Lubrication Engi- neers, 1967, 23(7).
  • 7J. Wilfried Bartz. Wear Behavior and Failure Mechanism of Bonded Solid Lubricants [ J ], Lubricant Engineering, 1986, 43(7).
  • 8陶江,李同生,沈维长,徐锦芬.石墨对聚四氟乙烯镶嵌轴承摩擦学性能的影响[J].摩擦学学报,1993,13(4):317-327. 被引量:10
  • 9Ross S. Sussman A. Surface Oxidation of Molybdenum Disulfide [ J ], the Journal of Physical Chemistry, 1995, 59(9).
  • 10Billett, M. M. Industrial Lubrication [ M ] , Pergamon Press, 1982.

二级参考文献6

  • 1顾仲坚,1992年
  • 2李伟麟,摩擦学学报,1991年,11卷,35页
  • 3陶江,摩擦学学报,1991年,11卷,120页
  • 4李同生,摩擦学学报,1989年,9卷,69页
  • 5杨柄训,摩擦学学报,1989年,9卷,39页
  • 6周国民,党鸿辛.固体润滑及其研究的重要性[J]润滑与密封,1983(02).

共引文献9

同被引文献45

引证文献3

二级引证文献16

;
使用帮助 返回顶部