SiAlON陶瓷微观形貌分析表面腐蚀的实验研究
被引量:1
摘要
为了在扫描电镜下观察SiAlON陶瓷,必须对其进行适当的腐蚀以暴露其内部结构,本文尝试了几种腐蚀方法,并对结果进行了比较,确定对SiAlON陶瓷适宜的腐蚀液为熔融氢氧化钠,腐蚀时间为20秒.
出处
《四川有色金属》
1997年第1期21-22,26,共3页
Sichuan Nonferrous Metals
参考文献1
-
1K. H. Jack. Sialons and related nitrogen ceramics[J] 1976,Journal of Materials Science(6):1135~1158
同被引文献13
-
1McKee D W, Chatterji D. Corrosion of silicon carbide in gases and alkaline melts [ J ]. Am Ceram Soc, 1976, 59 : 441 - 444.
-
2Jacobson N S. Kinetics and mechanism of corrosion SiC by molten salts[J]. Am Ceram Soc, 1986, 69: 74- 82.
-
3Piekrell G R, Sun T, Brown Jr J J. High temperature alkali corrosion of SiC and Si3N4 [J]. Fuel Proc Technol, 1995, 44:213 - 236.
-
4Song D Y, Kitaoka S, Kawamoto H. Hot corrosion of chemical vapor deposited SiC and Si3 N4 in molten Na2 SO4 salt[J]. Mater Sci, 1998, 33 : 1031 - 1036.
-
5Jacobson N. Corrosion of silicon-based ceramics in combustion environments[J]. Am Ceram Soc, 1993, 76 : 23 - 28.
-
6Mayer M, Riley F L. Sodium-assisted oxidation of reactionbonded silicon nitride[J]. Mater Sci, 1978, 13: 1319- 1328.
-
7Andrews A, Herrmann M, Sephton M, Machio Chr, Michaelis A. Electrochemical corrosion of solid and liquid phase sintered silicon carbide in acidic and alkaline environments [J]. Euro Ceram Soci,2007, 27, 5: 2127- 2135.
-
8Weidenmann K A, Rixecker G, Aldinger F. Liquid phase sintered silicon carbide ( LPS-SiC ) ceramics having. remarkably high oxidation resistance in wet air [ J ]. European Ceramic Society, 2006, 26: 2453- 2457.
-
9Km W J, Hwang H S, Park J Y. Corrosion behabior of reaction-bonded silicon carbide ceramics in high-temperature water[J]. Mater Sci Lett,2002, 21: 733- 735.
-
10Km W J, Hwang H S, Park J Y, et al. Corrosion behabior of sintered and chemically vapor deposited silicon carbide ceramics in water at 360 ℃ [J]. Materials Science Letters, 2003, 21 : 581 - 584.
二级引证文献6
-
1韩涛,苏生宝,吕海琴,程军.金属铝液对电磁泵用SiC陶瓷的侵蚀[J].热加工工艺,2010,39(15):50-52.
-
2叶进发.多层陶瓷电容器BaNd_2Ti_4O_(12)的化学腐蚀研究[J].压电与声光,2011,33(4):632-633. 被引量:1
-
3王盼,周国梁,潘传龙,张骋,粘洪强.8YSZ在NaF-KF熔盐中的热腐蚀行为研究[J].硅酸盐通报,2014,33(9):2296-2300. 被引量:1
-
4江品颐,刘海华,黄向东.液相渗Si工艺制备2D CF/SiC复合材料中SiC晶粒的生长机制[J].复合材料学报,2017,34(7):1561-1568. 被引量:2
-
5刘善勇,王玉玲,孙树峰,邵晶,刘庆玉,王津.高温化学腐蚀加工多孔碳化硅陶瓷的表征及机理[J].航空材料学报,2019,39(2):16-24. 被引量:3
-
6李冬梅,江孟达,向勇,韦小晴,吴炜坚.片式多层陶瓷电容器陶瓷晶粒酸腐蚀应用研究[J].压电与声光,2022,44(4):565-569. 被引量:1
-
1冼爱平,斯重遥.Sialon陶瓷与40Cr钢连接中缓冲层的作用[J].金属学报,1991,27(6). 被引量:10
-
2刘军,罗启富,余正国,陈雪梅,陈志刚.Sialon陶瓷热挤压模的应用研究[J].中国机械工程,1995,6(3):57-58. 被引量:7
-
3于思远,林彬,林滨,林梦霞.工程陶瓷超精密磨削表面质量的研究[J].金刚石与磨料磨具工程,2002,22(5):12-16. 被引量:14
-
4庄艳歆,冼爱平,王仪康,张修睦,胡壮麒.粗真空条件下锡基钎料与Sialon陶瓷的润湿和连接[J].金属学报,1996,32(7):735-741. 被引量:3
-
5宋新玉,赵军,姜俊玲.加工Inconel 718时陶瓷刀具的磨损机理[J].中国机械工程,2009,20(7):763-767. 被引量:16
-
6刘军,周飞.热挤压模用陶瓷材料的性能与应用研究[J].稀有金属材料与工程,2003,32(3):232-235. 被引量:7
-
7宋新玉.高速车削Inconel 718时切削力研究[J].潍坊学院学报,2011,11(6):107-109.
-
8郑光明,赵军,宋新玉,崔晓斌.陶瓷刀具切削镍基合金的三维数值模拟[J].组合机床与自动化加工技术,2010(3):4-6. 被引量:4