期刊文献+

用X射线应力仪测量嵌镶块大小和微观应变 被引量:2

下载PDF
导出
摘要 本文把单峰测定嵌镶块大小与微观应变的 Voigt 函数法应用于 X 射线应力测定仪,并编制了衍射峰形校正微机程序,使其能应用 X 射线应力测定仪对实际工件进行现场测定。实验结果表明:当衍射峰形状因子 W/β不是太大时,和传统的近似函数法符合较好,而当 W/β太大时,存在较大误差,应对 K值进行修正。
出处 《钢铁研究》 CAS 1990年第1期68-71,76,共5页 Research on Iron and Steel
  • 相关文献

同被引文献17

  • 1Omar M R. Analysis and reduction of electromagnetic field leakage through loaded apertures: a numerical study [J]. Electromagnetics, 2005, 25: 679-693.
  • 2Shigeyoshi Y, Mitsuharu S, Sugawara E, et al. Permeability and electromagnetic-interference characteristics of FeSiAI alloy flakes-polymer composite [J]. J Appl Phys, 1999, 85(8): 4636-4638.
  • 3Kim S W, Yoon Y W, Lee S J, et ai. Electromagnetic shielding properties of soft magnetic powder-polymer composite films for the application to suppress noise in the radio frequency range[J]. J Magn Magn Mater, 2007, 316: 472-474.
  • 4Shigeyoshi Y, Shinsuke A. Crystal structure and microwave permeability of very thin FeSiAl flakes produced by microforging [J]. J Appl Phys, 2003, 93(10): 6659-6661.
  • 5Zuo B, Saraswati N, Sritharan T, et al. Production and annealing of nanocarystalline Fe-Si and alloys powders [J]. Mater Sci Eng, 2004, A371: 210-216.
  • 6Kim Y D, Chung J Y, Kim J, et al. Formation of nanocrystalline Fe-Co powders produced by mechanical alloying [J]. Mater Sci Eng A, 2000. 291: 17-21.
  • 7Matsumoto M, Miyata Y. Thin electromagnetic wave absorber for quasi-microwave band containing aligned thin magnetic metal particles [J]. IEEE Trans Magn, 1997, 33(6): 4459-4464.
  • 8宛德福,马兴隆.磁性物理[M].北京:电子工业出版社,1999:436.
  • 9Kim S S, Kim S T, Yoon Y C, et al. Magnetic, dielectric, and microwave absorbing properties of iron particles dispersed in rubber matrix in gigahertz frequencies [J]. J Appl Phys, 2005, 97: 10F905.
  • 10Shigeyoshi Y, Shinsuke A. Crystal structure and microwave permeability of very thin FeSiAI flakes produced by microforging [J]. J Appl Phys, 2003. 93(10): 6659- 6661.

引证文献2

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部