期刊文献+

CCM技术制备PEMFC膜电极组件 被引量:2

Membrane electrode assembly (MEA) of PEMFC prepared by catalyst coated membrane (CCM) technique
下载PDF
导出
摘要 分两个发展方向介绍了运用Catalyst Coated Membrane(CCM)技术制备质子交换膜燃料电池(PEMFC)的核心部件——膜电极组件(MEA)的发展历史和现状,并对CCM制备技术的新发展进行了概括,认为研究更简便、更合理的CCM制作技术和实现MEA制作的机械化与自动化将是未来的发展趋势。 The development of MEA prepared by CCM technique for PEMFC was introduced in two different aspects. And the new development of CCM technique was presented. The trend of fabrication of MEA was discussed. More convenient and suitable fabricating method and fabricating MEA automatically will be the main in the future.
作者 周琛 廖世军
出处 《电源技术》 CAS CSCD 北大核心 2007年第6期469-471,共3页 Chinese Journal of Power Sources
基金 国家自然科学基金(20476034) 广东省科技计划基金资助项目(2004A11004003)
关键词 质子交换膜燃料电池 膜电极 CCM proton exchange membrane fuel celIs(PEMFC) membrane electrode assembly(MEA) CCM
  • 相关文献

参考文献18

  • 1CHUN Y G,KIM C S,PEEK D H,et al.Performance of a polymerelectrolyte membrane fuel cell with thin film catalyst electrodes[J].Journal of Power Sources,1998,71:174-178.
  • 2FREY T,LINARDI M.Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell performance[J].Electrochimica Acta,2004,50:99-105.
  • 3WILSON M S,GOTTESFELD S.High performance catalyzed membranes of ultra-low Pt loading for polymer electrolyte fuel cells[J].J Electrochem Soc,1992,139(2):L 28-L 30.
  • 4NEMOURS D P D.Membrane and electrode structure[P].USA:5330860,1994-07-19.
  • 5GENERAL MOTORS Corporation.Methodes of preparing membrane electrode assembles[P].USA:6524736,2003-02-25.
  • 6GENERAL MOTORS Corporation.Method of making MEA for PEM/SPE fuel cell[P].USA:6074692,2000-06-13.
  • 7FEDKIW P S,HER W H.Polyelectrolyte multilayers as nanostructured templates for inorganic synthesis[J].J Electrochem Soc,1989,136:899-900.
  • 8PARK J H,KIM J H,LEE H K,et al.A novel direct deposition of Pt catalysts on Nafion impregnated with polypyrrole for PEMFC[J].Electrochimica Acta,2004,50:769-775.
  • 9RAJALAKSHMI N,RYU H J,DHATHATHREYAN K S.Platinum catalysed membranes for proton exchange membrane fuel cells-higher performance[J].Chemical Engineering Journal,2004,102:241-247.
  • 10CHA S Y,LEE W M.Performance of proton exchange membrane fuel cell electrodes prepared by direct deposition of ultra thin plat in um on the membrane surface[J].Electrochemical Society,1999,146(11):4 055-4 066.

同被引文献14

  • 1WANG Y, CHEN K S, MISHLER J, et al. A review of polymer electrolyte membrane fuel cells:technology, applications, and needs on fundamental research [J]. Applied Energy, 2011, 88 (4): 981-1007.
  • 2FREY T,LINARDI M. Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell perfor- mance[J]. Electrochimica Acta, 2004,50(1): 99-105.
  • 3PASSOS R R,PAGANIN V A,TICIANELLI E A. Studies of the performance of PEM fuel cell cathodes with the catalyst layer di- rectly applied on nation membranes [J]. Electrochimica Acta, 2006,51 (25): 5239-5245.
  • 4LEI M X,SHI J L, LI J Y, et al. Investigation of a novel catalyst coated membrane method to prepare low-platinum-loading mem- brane electrode assemblies for PEMFCs[J]. Fuel Cells,2009,9(2): 101-105.
  • 5MILLINGTON B, WHIPPLE V,POLLET B G. A novel method for preparing proton exchange membrane fuel cell electrodes by the ultrasonic-spray technique [J]. Journal of Power Sources, 2011, 196(20): 8500-8508.
  • 6CHISAKA M, DAIGUJI H. Effect of glycerol on micro/nano struc- tures of catalyst layers in polymer electrolyte membrane fuel cells [J]. Electrochimica Acta, 2006,51 (23): 4828-4833.
  • 7CHISAKA M, MATSUOKA E, DAIGUJI H. Effect of organic sol- vents on the pore structure of catalyst layers in polymer electrolyte membrane fuel cells [J]. Journal of the Electrochemical Society, 2010,157(8): B1218-B1221.
  • 8CHO J H, KIM J M, PRABHURAM J, et al. Fabrication and eval- uation of membrane electrode assemblies by low-temperature de- cal methods for direct methanol fuel cells [J]. Journal of Power Sources, 2009,187(2): 378-386.
  • 9程晓亮,衣宝廉,张景新,韩明,乔亚光.PEMFC催化层中PTFE和Nafion对催化剂利用率的影响[J].电化学,1999,5(2):218-223. 被引量:7
  • 10丛文博,金丽华,刘志祥.质子交换膜燃料电池的初步研究[J].电源技术,2001,25(1):13-14. 被引量:10

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部