期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

C_f/SiC的制备及连接性、抗氧化性研究 被引量：1

Progress of Carbon Fiber-Reinforced SiC Composites
下载PDF
导出
摘要 论述了Cf/SiC常用的制备工艺和钽、铌及其合金在SiC陶瓷、Cf/SiC连接方面的应用,铱在C/C、石墨抗氧化方面的应用。指出了难熔金属在陶瓷基复合材料上应用存在的问题,提出了解决的方法,展望了难熔金属在陶瓷基复合材料上应用的发展方向。 The development state of Cf/SiC CMCs fabricating method and tantalum, niobium and their alloys used for joining SiC ceramic and Cf/SiC composites is discussed, and iridium used as oxidation resistance coating to C/C composites and graphite is also discussed. The problems existing in refractory metals application are pointed out and solutions are put forward. The developing direction of refractory metals used in ceramic matrix composites is proposed.
作者 黄烨 李鸿鹏
机构地区 空军工程大学工程学院
出处 《宇航材料工艺》 CAS CSCD 北大核心 2007年第3期6-8,共3页 Aerospace Materials & Technology
关键词 CF/SIC 制备工艺 进接 抗氧化 Cf/SiC, Fabricating method,Joining, Oxidation resistance
分类号 TB332 [一般工业技术—材料科学与工程]
  • 相关文献

参考文献19

  • 1殷小玮,成来飞,张立同,徐永东.Cr-Si复合涂层C/SiC复合材料的显微结构与性能[J].材料工程,2001,29(9):25-27. 被引量：2
  • 2甘永学.纤维增强陶瓷基复合材料的研究及其在航空航天领域的应用[J].宇航材料工艺,1994,24(5):1-5. 被引量：16
  • 3肖翠蓉.复合材料工艺学[M].北京:国防科技大学出版社,1997
  • 4Cheng Laifei,Xu Yongdong,Zhang Litong et al.Oxidation behavior of three dimensional C/SiC composites in air and combustion gas environments.Journal of Carbon,2000;38(15):2 103～2 108
  • 5Cardonne S M.Kumar P.Miehaluk C A et al.Tantalam and Its Alloys.Advanced Materials & Processes,1992;142(3):16～20
  • 6Indacochea J E,Sean McDeavitt,Billings G W.Interface interactions of dissimilar materials at elevatedtemperatures.Advanced Engineering Materials,2001;11:895～901
  • 7Singh M.Ceramic joining technology.Advanced Materials & Processes,1998;148(3):89～90
  • 8Aparicio Mario,Duran Alicia.Yttrium silicate coatings for oxidation protection of carbon-silicon carbide composites.Journal of the American Ceramic Society,2000;83(6):1 351～1 355
  • 9Joshi A,Hu H S,Jesion L et al.High-Temperature interaetions of refractory metal matrices with selected ceramic reinforcements.Metallurgical Transactions,1990;21A(11):2 829～2 837
  • 10Feng J C.Naka M,Schuster J C.Phase formation and diffusion path of SiC/Ta/SiC joint.Journal of Materials Science Letters,1997;16(13):1 116～1 117

二级参考文献9

共引文献36

同被引文献10

  • 1张中伟,王俊山,许正辉,李承新.C/C复合材料1800℃抗氧化涂层探索研究[J].宇航材料工艺,2005,35(2):42-46. 被引量：20
  • 2王林山,熊翔,肖鹏,闫志巧,张红波,刘根山.高温热处理对C/C-SiC复合材料制备与力学性能的影响[J].新型炭材料,2005,20(3):245-249. 被引量：19
  • 3Naslain R.Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors:an overview. Compos. Sci. Technol,2004,64(2):155-170.
  • 4Snell L et al. A novel laser technique for oxidation-resistant coating of carbon-carbon composites. Carbon, 2001,39(7):991-999
  • 5黄剑峰.碳/碳复合材料高温抗氧化SiC/硅酸盐复合涂层的制备、性能与机理研究.西北工业大学博士论文,2004,13-15.
  • 6Zhao Jet al. SiC/Si-MoSi2oxidation protective coatings for carbon materials. Surf. Coat. Technol,2006,201(3-4):1861-1865.
  • 7Schulte-Fischedick J et al. Oxidation behavior of C/C-SiC coated with SiC-B4 C-SiC-cordierite oxidation protection system. Mater. Sci. Eng,2004,A386(1-2):428-434.
  • 8Schubert T et al.Effects of high energy milling on densification behavior of Mo-Si powder mixtures during pressureless sintering. Intermetallics,2002,10(9):873-878.
  • 9Elsing R et al. Calculation of residual thermal stress in plasma-sprayed coating. Surf. Coat. Tech,1990,43/44(part 1):416-425.
  • 10Scardi Pet al. Residual stresses in plasma-sprayed partially stabilized Zirconia TBCs:influence of the deposition temperatur. Thin Solid Films, 1996,278(1-2):96-103.

引证文献1

二级引证文献4

宇航材料工艺
2007年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部