期刊文献+

空气流雾化铝硅共晶合金粉末钎料的粒度分布

The size distribution of the powder solder for Al-Si eutectic alloy using gas atomization
下载PDF
导出
摘要 对空气雾化制备的A1-Si共晶合金粉末钎料粒度分布进行了研究,结果表明,粉末钎料粒度分布呈双峰曲线,主要分布在105~246μm之间.运用二次破碎机理对颗粒分布特征进行了分析,并推导出液滴发生二次破碎极限尺寸的计算公式. The size distribution of the powder solder for A1-Si eutectic alloy using gas atomization is studied. It is pointed out that the size distribution of the powder solder covered a range of 105 to 246μm. The size distribution curve indicates a bimodal population. It is proposed that these large droplets undergo fur ther disintegration in flight to produce the powder (secondary break-up). Although adequate theories are not available for the prediction of the sizes of the daughter particles, methods in the present work are available for the estimation of the stable particle ranges. Research in single liquid droplet has shown that secondary break-up will not occur unless these sizes of liquid droplets exceed a critical value.
出处 《材料研究与应用》 CAS 2007年第2期140-142,共3页 Materials Research and Application
关键词 雾化 铝硅共晶合金 粉末钎料 粒度分布 二次破碎 极限尺寸 gas atomizations A1-Si eutectic alloy powder solders size distributions secondary'break-ups critical size
  • 相关文献

参考文献3

  • 1[3]NAL A.Gas atomization of fine zinc powders[J].The International Journal of Powder Metallurgy,1990,26(1):13-16.
  • 2李清泉,王吉南,薛明伦.超音速气动雾化制粉机理的实验研究及分析[J].力学学报,1992,24(6):653-660. 被引量:5
  • 3[5]NAL A.Liquid break-up in gas atomization of fine aluminum powders[J].Metallurgical Transactions B,1984,20B:68.

二级参考文献2

  • 1薛明伦,1986年
  • 2李清泉

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部