期刊文献+

高温拉压环境下DZ125高温合金的热障涂层失效 被引量:5

Failure of TBCs on DZ125 Alloy under Tension-Compression Load and High Temperature
下载PDF
导出
摘要 采用电子束物理气相沉积法(EB-PVD)在定向凝固Ni基高温合金DZ125基体上制备了NiCoCrAlY粘结层和YSZ陶瓷层,研究了高温拉压环境下热障涂层的失效模式,并对其进行了有限元分析。实验结果表明,热障涂层的失效与仅受热载荷作用下的有很大不同,仅有热载荷作用下的热障涂层裂纹多萌生于热氧化层(TGO)内部,进而扩展引起热障涂层的失效。而高温拉压试验后热障涂层体系存在两种裂纹,分别萌生于TGO/粘结层界面和粘结层/扩散层界面附近。有限元模拟结果显示TGO/陶瓷层和TGO/粘结层处存在应力状态的转变和应力值的突变,径向应力的突变导致了界面分离现象的产生,而轴向应力的突变加速了垂直于界面裂纹的扩展,并导致了试样的最终断裂。 Tension-compression tests at high temperature were carried out on the specimens made of Ni based superalloys (DZ 125 alloy) coated with bond coating (NiCoCrAlY) and zirconia ceramic coating by electron beam-physical vapor deposition(EB-PVD). Failure of the thermal barrier coatings (TBC) was investigated. The test results show that the failure of TBCs occurred from the initiation and expansion of fracture in TGO, differing from under thermal loading alone. There are two kinds of fracture cracks: initiating from the TGO/bond coat interface and the bond coat/diffusion coat, respectively, resulting in the failure of specimens at last. From the simulation results by finite element analysis (FE), it can be conclude that there are abrupt changes of stress state and value near the interfaces of TGO/TBC and TGO/bond coats. The abrupt change of radial stress would result in the failure of TBCs from the spallation of interface. The abrupt change of axial stress would accelerate the extension of the microcracks perpendicular to the interface, resulting in the rupture of specimens.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2007年第6期1012-1015,共4页 Rare Metal Materials and Engineering
基金 国家自然科学基金项目(50571005 50420130032)资助
关键词 热障涂层 电子束物理气相沉积 有限元模拟 失效 thermal barrier coating (TBC) electron beam physical vapor deposition(EB-PVD) finite element simulation (FE) failure
  • 相关文献

参考文献10

二级参考文献13

  • 1吕反修,许庆芳,宋铂,佟玉梅,喻中清.溶胶制备工艺对ZrO_2-Y_2O_3涂层性能的影响[J].北京科技大学学报,1996,18(2):131-135. 被引量:1
  • 2田民波 刘德令.薄膜科学技术手册(上册)[M].北京:机械工业出版社,1991..
  • 3竹国博光 赖耿阳(译).陶瓷材料涂敷技术[M].台北:复汉出版社,1989.138-160.
  • 4曲静信 汪泓宏.表面工程手册[M].北京:化学工业出版社,1998..
  • 5Stout J H, Shores D A, Goedjen J G, et al. Stresses and cracking of oxide scales[J]. Oxidat Metals, 1989, 120(1):193-197.
  • 6Bi X F, Xu H B, Gong S K. Investigation of the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition[J]. Surf Coat Technol, 2000, 120:122-126.
  • 7Tzimas E, Müllejans H, Peteves S D. Failure of thermal barrier coating systems under cyclic thermo-mechanical loading[J]. Acta mater, 2000,48: 4699-4707.
  • 8Mumm D R, Evans A G. On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition[J]. Acta mater, 2000, 48: 1815-1827.
  • 9Xu H B, Gong S K, Deng L. Preparation of thermal barrier coatings for gas turbine blades by EB-PVD[J]. Thin Solid Films, 1998,334(2): 98-102.
  • 10Berndt C C, Herman H. Failure during thermal cycling ofPlasma-sprayed thermal barrier coatings[J]. Thin Solid Films, 1983 ,108(4):427-437.

共引文献60

同被引文献72

引证文献5

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部