铣削淬硬模具钢SKD11铣削表面质量试验研究(英文)

EXPERIMENT ON SURFACE INTEGRITY OF MILLING TOOL FOR HARDENED STEEL SKD11

为了对高效铣削淬硬模具钢SKD11的新型铣刀进行优选,对不同几何结构的铣刀加工得到的表面质量进行了分析。综合考虑了加工表面粗糙度、切屑微观形态、硬度及硬化层深度、残余应力分布和晶相组织结构变化等多方面因素,研究了不同铣刀的几何特性及其磨损特性对表面质量的影响。实验结果表明,前角5°,后角10°,刀尖圆弧半径为1mm,铣刀螺旋角为45°的几何结构铣刀完成了表面完整性试验中。此外,在淬硬钢铣削加工中合理地选择加工参数可以获得0.4μm的表面粗糙度;采用合理的正前角可以抑制锯齿形切屑的产生。铣削淬硬模具钢能在加工表面产生残余压应力,通过增加铣刀后角和抑制后刀面磨损可以推迟加工表面软化现象的发生。

To evaluate the new designed cutting tools for high-efficiency milling of the hardened die steel SKD11,surface integrities of millers with different geometric structures are analyzed, considering the surface roughness, micrograph of chips, surface microhardness, residual stress and metallurgical texture of the surface layer. The in fluences of geometric characteristics of different cutting tools and their wear characteristics on the surface integrity are studied. Results show that the milling tool with rake angle; 5 of the hardened diesteel. The generation of saw-tooth chips is depressed when a reasonable positive rake angle is selected. And the compressive residual stress is induced on the machined surface in milling the hardened die steel. The occurrence of surface softening is postponed by increasing the clearance angle and reducing the tool flank wear.