期刊文献+

RP-HPLC法同时测定复方明目胶囊中绿原酸和秦皮甲素的含量

RP-HPLC determination of chlorogenic acid and aesculin in compound Mingmu capsules
下载PDF
导出
摘要 目的:建立复方明目胶囊中绿原酸和秦皮甲素含量的测定方法。方法:采用反相高效液相色谱法,ZORBAX~C_(18)(4.6mm×250 mm,5μm)色谱柱,乙腈-0.1%磷酸溶液(用三乙胺调节 pH=4.5)(8:92)为流动相,检测波长327 nm,流速0.8 mL·min^(-1),柱温25%。结果:绿原酸在1.0~6.0μg范围内与峰面积呈良好线性关系,r=0.9993,绿原酸平均加样回收率为100.2%,RSD 为0.9%(n=5);秦皮甲素在1.60~12.32μg范围内与峰面积呈良好线性关系,r=0.9996,秦皮甲素平均加样回收率为97.3%,RSD 为1.2%(n=5)。结论:本方法可靠性高,准确性和重复性好,适用于复方明目胶囊中绿原酸和秦皮甲素的含量测定。 Objective: To develop an HPLC method for determination of chlorogenic acid and aesculin in compound Mingmu capsules. Methods:The analytical column was ZORBAX -C18 (4. 6 mm× 250 mm ,5 μm)filled with a 5 μm stationary phase. The mobile phase consisted of acetonitrile - 0. 1% orthophosphoric acid (8: 92), the flow -rate was 0. 8 mL · min^-1. The injection volume was 20μL. The detector wavelength was set at 327 nm. The column temperature was 25 ℃. Results:The precision and stability were fine. The calibration curve was linear over the range of 0. 1 -0.6 μg for chlorogenic acid(r =0. 9993) and 1.60 - 12. 32 μg for aesculin(r =0. 9996). The average recovery (n = 5 ) of chlorogenic acid was 100. 2% and that of aesculin was 97. 3%. Conclusion:The proposed method may be used in the quantitative analysis of chlorogenic acid and aesculin. The method is convenient, economical and accurate with good reproducibility.
出处 《药物分析杂志》 CAS CSCD 北大核心 2007年第6期890-892,共3页 Chinese Journal of Pharmaceutical Analysis
关键词 绿原酸 秦皮甲素 反相高效液相色谱法 复方明目胶囊 chlorogenic acid aesculin RP - HPLC compound Mingmu capsules
  • 相关文献

参考文献4

二级参考文献7

  • 1傅沛云.东北植物检索表[M].北京:科学出版社,1995..
  • 2.中华人民共和国药典(一部)[s].北京:化学工业出版社,2000.223.
  • 3.华山药物志编委会华山药物志[M].陕西:陕西科学技术出版社,1983.363-364.
  • 4邬家林 谢宗万 等.秦皮生药学的研究.药学学报,1982,17(11):854-861.
  • 5中华人民共和国国家药典委员会.中国药典[S]一部.[S].北京:化学工业出版社,2005.191.
  • 6郭希圣 章育中.秦皮中有效成分的高效液相层析分离和测定[J].药学学报,1983,18(7):525-525.
  • 7季申,王柯.HPLC法测定秦皮中秦皮甲素、秦皮乙素的含量[J].中成药,1997,19(10):40-41. 被引量:19

共引文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部