期刊文献+

甲基乙烯基硅橡胶/丁基橡胶的力学与阻尼性能(英文) 被引量:3

Mechanical and damping properties of polymethylvinylsiloxane/butyl rubber composites
下载PDF
导出
摘要 以酚醛树脂为硫化剂,采用混炼-模压工艺制备了甲基乙烯基硅橡胶/丁基橡胶(PMVS/IIR)复合材料,并进行了力学性能及阻尼性能分析。结果表明:随着PMVS/IIR复合材料中PMVS所占比例的增加,其拉伸强度和扯断伸长率下降,在PMVS/IIR(质量比)为100/100、酚醛树脂质量分数为IIR的4%时,其阻尼性能最佳,并同时具有较好的力学性能,此时,PMVS的阻尼因子(tanδ)最大值从0.14提高到0.69,tanδ大于0.3的温度区间为-50-100℃,表明该材料可用作阻尼材料。 Recently, polysiloxane are attractive as damping materials for their steady mechanical properties in a wide temperature range from -50 ℃ to 200 ℃. However, their damping properties are low at room temperature for their low glass transition temperature. In this work, polymethylvinylsiloxane (PMVS)/butyl rubber ( IIR ) composites were prepared by simple blend and compression moulding using phenolic resin as vulcanizing agent.
出处 《合成橡胶工业》 CAS CSCD 北大核心 2007年第2期158-158,共1页 China Synthetic Rubber Industry
基金 Supported by the Defense Pre-research Project of the"Eleventh-Five-Year-Plan"of China(51312040404)
  • 相关文献

参考文献2

  • 1Bischoff R.Polysiloxanes in macromolecular architecture[J].Progress in Polymer Science,1999,24 (2):185-219
  • 2Chiu Hsien-Tang.Study on mechanical properties and intermolecular interaction of silicone rubber/polyurethane/epoxy Blends[J].Journal of Applied Polymer Science,2003,89 (6):959-970

同被引文献395

引证文献3

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部