期刊文献+

油气田开发单井经济产能界限模型研究 被引量:12

RESEARCH ON SINGLE WELL ECONOMIC PRODUCTIVITY BOUNDARY MODEL IN OIL AND GAS FIELD DEVELOPMENT
下载PDF
导出
摘要 在油气田开发过程中,单井产能的高低是影响油气田开发效益的主要因素,影响油气田单井产能的因素有:油藏构造及复杂程度、油藏储量丰度、油层性质(孔隙、渗透率、含有饱和度等)等。通过对油气田开发单井总投入与总产出的分析,建立了单井经济产能界限的模型,并结合油气田的实际情况,选取相应的参数,进行单井开发经济产能界限的计算和敏感性分析。为油气田加强单井管理、搞好目标成本分析,提供了数量化的、与经济效益相结合的依据。 In development of oil/gas field, the single well productivity is a main factor to affect the oil/gas field development benefit. The factors that affect the single well productivity have: reservoir structure, abundance of reserves, reservoir properties (pores, permeability, oil saturation etc.) etc. Based on the analysis of total input and total output in single well development, the economic productivity boundary model in single well was established, and in combination with practical situation of oil/gas field, the calculation of economic productivity boundary and reservoir sensibility analysis in single well development were carried out by selecting corresponding parameters. The calculation and analysis results supply basis for enhancing the single well management and make target cost analysis.
出处 《钻采工艺》 CAS 北大核心 2007年第4期62-63,77,共3页 Drilling & Production Technology
基金 四川省教育厅社会科学重点研究项目"公司证券投资研究"(编号:川教科SA03-087) 国家自然科学基金资助项目(编号:90610013)。
关键词 油气田 单井 经济产能 模型 oil and gas fields, individual well, economic productivity, model
  • 相关文献

参考文献7

二级参考文献32

  • 1中国国际工程咨询公司.投资项目经济咨询评估指南[M].中国经济出版社,1998..
  • 2郑俊德 张洪亮.油田开发与开采[M].北京:石油工业出版社,1997.33.
  • 3E.D. Sloan. Clathrate Hydrate of Natural Gases. Marcel Dekker, New York, 1997.
  • 4E. Dendy Sloan Jr. Natural gas hydrates. Journal petroleumtechnology. 1991,43(12): 1414 - 1417.
  • 5A.J. Kidnay, Liquefied Natural Gas, Min. Indust. Bulletin, Vol. 15, No.2, 1972.
  • 6MacDonald, G.J. The future of methane as an energy resource. Annual Review of Energy. 1990, 15:53 - 83.
  • 7Attari A e t a l. Natural gas energy measurement.1987:479.
  • 8ISO/CD15112. Natural gas-Energy determination,2000.
  • 9ISO/CD15971-1. Natural gas- Measurement of properties Combustion properties Part:1: Calorific value,2000.
  • 10Studzinski W,Karnik U,Morrow T e t al. Revision of ANSI-2530 orifice Meter Standard-Basis of Recommmended Meter Run Length.The 4th International Symposium on Fluid Flow Measurement,Dolorado,USA,27~30 June 1999,section 14(5).

共引文献94

同被引文献53

引证文献12

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部