期刊文献+

长封固段固井套管热应力分析 被引量:6

ANALYSIS OF THE THERMAL STRESS OF CASING FOR LONG SECTION CEMENTATION
下载PDF
导出
摘要 对于长封固段固井所用套管,由于井眼温度场的作用,使得固井温度平衡后产生一定的热应力。根据固井过程中及固井结束后井眼温度场变化,利用热弹性力学理论,推导了描述固井前后套管柱热应力的公式,并以此为基础建立了考虑热应力作用的套管柱安全系数计算新方法。研究发现:在热应力作用下套管柱抗拉、抗外挤安全系数有所降低,更易使套管产生破坏;使用常规套管安全系数计算方法设计长封固段套管柱有可能导致套管柱产生强度破坏。 Thermal stress of casing for long section cementation yields because of the temperature change of casing before and after cementation. According to the distribution of the temperature field, using the related thermoelasticity theory, the thermal stress formulation is derived, and a new method of calculating the thermal stress and the safety coefficient of casing is presented. According to the research, the safety coefficient of casing descends under the effect of thermal stress, which makes the casing fail easier. The casing for long section cementation designed by conventional method may fail under the effect of thermal stress.
出处 《钻采工艺》 CAS 北大核心 2007年第4期109-111,共3页 Drilling & Production Technology
关键词 热应力 温度场 安全系数 thermal stress, temperature field, safety coefficient
  • 相关文献

参考文献4

二级参考文献11

  • 1张允真,石油钻采工艺,1992年,4期
  • 2李葆青,石油钻采工艺,1990年,4期
  • 3李克向,钻井手册.甲方,1990年
  • 4怀特 P D,热采方法,1988年
  • 5吴疆,石油钻采工艺,1985年,3期
  • 6杨耀乾,薄壳理论,1984年
  • 7徐芝纶,弹性力学.上,1980年
  • 8WILLHITE G P. Design criteria for completion of steam injection wells [J]. JPT, 1967, 19(1):5-21.
  • 9HOLLIDAY G H. Calculation of allowable maximum casing temperature to prevent tension failures in thermal wells [R]. ASME Paper,1969.
  • 10崔孝秉,曹玲,张宏,徐玉兵,吕素如,刘坤芳,宋治.注蒸汽热采井套管损坏机理研究[J].石油大学学报(自然科学版),1997,21(3):57-64. 被引量:47

共引文献68

同被引文献38

引证文献6

二级引证文献59

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部