期刊文献+

增塑剂DBP对PVDF-HFP聚合物膜性能的影响 被引量:4

Effects of plasticizer DBP on performance of polymer membrane PVDF-HFP
下载PDF
导出
摘要 采用Bellcore制膜法制备了锂离子电池用PVDF-HFP共聚物型多孔聚合物隔膜;研究了增塑剂DBP对该聚合物膜的离子电导率、电化学稳定窗口的影响.研究表明,随增塑剂含量增大,离子电导率不断提高,在增塑剂与溶剂体积比大于等于20%时,离子电导率可达10^-3S·cm^-1;在增塑剂与溶剂体积比为10%~30%时,该聚合物膜的电化学稳定窗口在4.3 V以上,均能满足锂离子电池的要求,并且随增塑剂含量的增大,电化学稳定窗口先增大后减小,在比值为20%时达到最大,为5.3 V左右. By means of Bellcore, the microporous polymer separators PVDF-HFP used in lithium-ion batteries are prepared. And the effects of plasticizer DBP on the performance of polymer membrane PVDF-HFP,including the ion conductivity and the electro-chemical stability window. The results show that the larger the quantity of DBP, the higher the ion conductivity, and the ion conductivity arrived 10^-3S·cm^-1 when the volume ratio of DBP to solvent is more than 1:5 ;When the volume ratio of DBP to solvent is 1:10 to 3: 10,the electro-chemical stability window of PVDF-HFP is above 4.3 V, it obviously can satisfy the requirement of lithiumion battery, meanwhile, the electro-chemical stability window first larger then lower as the quantity of DBP increasing,when the ratio is 1 : 5,it arrived the largest, almost 5.3 V.
出处 《哈尔滨商业大学学报(自然科学版)》 CAS 2007年第4期427-429,共3页 Journal of Harbin University of Commerce:Natural Sciences Edition
关键词 聚合物隔膜 离子电导率 稳定窗口 增塑剂 polymer seperator ion conductivity stability window plasticizer
  • 相关文献

参考文献7

二级参考文献79

  • 1丁黎明,林云青,周子南,王佛松.交替马来酸酐共聚物多缩乙二醇酯盐络合物的离子传导性[J].高等学校化学学报,1994,15(11):1727-1729. 被引量:7
  • 2夏笃伟,张肇熙,侯欣平.固体高分子凝胶电解质I.交联聚醚高分子凝胶电解质[J].高分子材料科学与工程,1995,11(6):90-93. 被引量:4
  • 3[1]Gozdz A S, Scumutz C N, Tarascon J M. Rechargeahle lithium intercalation battery with hybrid polymeric electrolyte[ P]. USP:5 296 318, 1993 -03 -05.
  • 4[2]PeriasamyP, Tasumi K, ShikanoM, etal. Studies on PVDF-based gel poly mer electrolytes[J ]. J Power Sources, 2000, 88: 269 - 273.
  • 5[3]Ganesh Venngopal, John Moore, Jason Howard, et al. Characterization of microporous separators for lithium-ion batteries [ J ]. J Power Sources, 1999, 77:34 - 41
  • 6[4]Rajendran S, Uma T. Experimental investigations on PVC-LiAsF6-DBP polymer electrolyte systems[ J ] . J Power Sources, 2000, 87:218 - 222.
  • 7[5]Qiao Shi, Minfmin Yu, Xiao Zhou, et al. Structure and performance of porous polymer electrolytes based on P(VDF-HFP) for lithium ion batteries[ J ]. J Power Sources, 2002, 88: 286 - 292
  • 8[6]Song J Y, Wang Y Y, Wan C C. Review of gel-type polymer electrolytes for lithium-ion batteries[J]. J Power Sources, 1999, 77:183- 197
  • 9Angell C A, Lin C and Sanchez E. Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity[J]. Nature, 1993, 362(6416): 137-139
  • 10Gozdz A S, Scumutz C N and Tarascon J M. Rechargeable Lithium Intercalation Battery with Hybrid Polymeric Electrolyte[P]. US Patent 296 318, 1993-03-05

共引文献49

同被引文献48

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部