期刊文献+

Ar Pressure Dependence of the Properties of Molybdenum-doped ZnO Films Grown by RF Magnetron Sputtering

Ar Pressure Dependence of the Properties of Molybdenum-doped ZnO Films Grown by RF Magnetron Sputtering
下载PDF
导出
摘要 Transparent conducting oxide film of molybdenum-doped zinc oxide (MZO) with high transparency and relatively low resistivity was prepared by RF (radio frequency) magnetron sputtering at room temperature. The structural, electrical, and optical properties of the films deposited under different Ar pressure were investigated.XRD (X-ray diffraction) patterns show that the nature of the films is polycrystalline with a hexagonal structure and a preferred orientation along the c-axis. The resistivity increases as Ar pressure increases. The lowest range exceeds 88% for all the samples. The optical band gap decreases from 3.27 to 3.15 eV with increasing Ar pressure from 0.6 to 3.0 Pa. Transparent conducting oxide film of molybdenum-doped zinc oxide (MZO) with high transparency and relatively low resistivity was prepared by RF (radio frequency) magnetron sputtering at room temperature. The structural, electrical, and optical properties of the films deposited under different Ar pressure were investigated.XRD (X-ray diffraction) patterns show that the nature of the films is polycrystalline with a hexagonal structure and a preferred orientation along the c-axis. The resistivity increases as Ar pressure increases. The lowest range exceeds 88% for all the samples. The optical band gap decreases from 3.27 to 3.15 eV with increasing Ar pressure from 0.6 to 3.0 Pa.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2007年第4期509-512,共4页 材料科学技术(英文版)
基金 supported by the National Key Basic Research and Development Programme of China(No.2001CB610504) the National Natural Science Foundation of China(Grant No.60576039,10374060).
关键词 Zinc oxide Magnetron sputtering Ar pressure Molybdenum-doped ZnO Films Zinc oxide Magnetron sputtering Ar pressure Molybdenum-doped ZnO Films
  • 相关文献

参考文献22

  • 1[1]M.Tadatsugu,T.Shinzo and K.Toshikazu:J.Vac.Sci.Technol.,1996,A14,1689.
  • 2[2]J.Puetz,F.N.Chalvet and M.A.Aegerter:Proc.SPIE-Int.Soc.Opt.Eng.,2002,73,4804.
  • 3[3]X.Jiang,F.L.Wong,M.K.Fung and S.T.Lee:Appl.Phys.Lett.,2003,83,1875.
  • 4[4]A.Gupta and A.D.Compaan:Appl.Phys.Lett.,2004,85,684.
  • 5[5]I.Hamberg and C.G.Granqvist:J.Appl.Phys.,1986,60,123.
  • 6[6]J.S.Kim,M.Granstr(o)m,R.H.Friend,N.Johansson,W.R.Salaneck,R.Daik,W.J.Feast and F.Cacialli:J.Appl.Phys.,1998,84,6859.
  • 7[7]E.Gautier,A.Lorin,J.M.Nunzi,A.Schalchli,J.J.Benattar and D.Vital:Appl.Phys.Lett.,1996,69,1071.
  • 8[8]S.J.Henley,M.N.R.Ashfold and D.Cherns:Surf.Coat.Technol.,2004,177-178,271.
  • 9[9]B.M.Ataev,A.M.Bagamadova,V.V.Mamedov,A.K.Omaev and M.R.Rabadanov:J.Cryst.Growth.,1999,198/199,1222.
  • 10[10]W.J.Jeong and G.C.Park:Sol.Energy.Mat.Sol.C.,2001,65,37.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部