期刊文献+

高温盐浆泵用新型不锈钢的研制

New stainless steel for high-temperature brine pump
下载PDF
导出
摘要 采用金相显微镜和X射线衍射相结合的方法,观察与分析了高温盐浆泵用新型不锈钢的金相组织,并通过多种腐蚀试验方法,研究了不同热处理制度对钢的耐腐蚀性能的影响。试验结果表明,这种钢在1100℃经两小时水冷固溶处理后,碳化物基本全部固溶于奥氏体基体中,适量的铁素体呈块状或点状弥散均匀分布,具有良好的耐均匀腐蚀、晶间腐蚀、点蚀和电化学腐蚀性能。 The microstructure of a new type of stainless steel for high-temperature brine pumps is analyzed by means of the metallurgical microscope and X-ray diffraction spectrum. The influence of different heat treatment processes on the corrosion resistance of the steel is investigated by various methods of corrosion test. The test result shows that the steel possesses good uniform corrosion-, intergranular corrosion-, pitting corrosion- and electrochemical corrosion-resistant properties after water cooled solution heat treatment for two hours at 1100℃.
出处 《石油机械》 EI 北大核心 1997年第3期14-17,58-59,共4页 China Petroleum Machinery
关键词 盐浆泵 不锈钢 热处理 化学成分 金相分析 brine pump stainless steel heat treatment chemical composition metallographic analysis corrosion test
  • 相关文献

参考文献2

二级参考文献3

  • 1秦紫瑞,李隆盛,于勇,邵有全,项礼.新型ZNSNM(L)合金的组织与性能的研究[J]热加工工艺,1987(03).
  • 2秦紫瑞,李隆盛,于勇,邵有全,项礼.铸造镍钼合金的析出相及其对耐蚀性能的影响[J]机械工程材料,1987(06).
  • 3秦紫瑞,李隆盛,郭珊,高文华.双相铸造不锈钢的组织及其局部腐蚀行为[J].机械工程材料,1989,13(1):20-23. 被引量:14

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部