期刊文献+

CSP低碳钢过冷奥氏体的连续冷却转变 被引量:2

Continuous Cooling Transformation of Undercooling Austenite of CSP Low Carbon Steel
下载PDF
导出
摘要 通过膨胀法在THERMECMASTOR-Z热模拟实验机上测定了CSP低碳钢的连续冷却转变曲线;通过金相试验分析了其室温产物的微观组织。结果表明:随着冷却速度的增大,相变开始温度和结束温度均降低,晶粒明显被细化。 Through dilatation test,the continuous cooling transformation curve of the austentite of CSP low carbon steel was measured on THERMECMASTOR-Z thermal simulation machine. The room temperature microstructure of the steel was analysed by metallorgraphic experiment. The results show that, when cooling velocity increases,the beginning temperature and the finishing temperature of phase transformation are both decrease,the grain is obviously refined.
出处 《热加工工艺》 CSCD 北大核心 2007年第14期33-34,38,共3页 Hot Working Technology
关键词 低碳钢 冷却速度 连续冷却转变曲线 显微组织 low carbon steel cooling velocity CCT curve microstructure
  • 相关文献

参考文献4

二级参考文献12

  • 1赵金福,明旭光,欧立晋,崔玉琴,杜英敏.残留奥氏体的相变诱导塑性研究[J].机械工程材料,1993,17(2):14-17. 被引量:11
  • 2王绪,花礼先,王四根.硅锰系相变诱发塑性钢的热处理工艺研究[J].金属热处理,1995,20(6):14-17. 被引量:14
  • 3田村今男 王国栋译.高强度低合金钢的控制轧制与控制冷却[M].冶金工业出版社,1992,6..
  • 4Zentara N 唐荻 等.铌-钒低合金钢直装薄板的热轧工艺化.薄板坯连铸连轧性能控制技术研讨会论文集[M].北京:北京科技大学,1998.17-24.
  • 5王有名 李曼云 等.钢材的控制轧制和控制冷却[M].北京:冶金工业出版社,1995..
  • 6田乃嫒.薄板坯连铸连轧(第2版)[M].北京:冶金工业出版社,2004..
  • 7Harizaki A Z,Hodgson P D,Yue S.Hot deformation characteristics of Si-Mn TRIP steels with and without micro-alloy additions[J].ISIJ Inter,1995,35(3):324-331.
  • 8Pereloma E V,Timokhina I B,Hodgson P D.Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb[J].Mater Sci Eng,1999,A273-275:448-452.
  • 9Sugimoto K,Nagasaka A,Kobayashi M,et al.Effects of retained austenite parameters on warm stretch-flange-ability in TRIP-aided dual phase sheet steels[J].ISIJ Inter,1999,39(1):56-63.
  • 10邹宏辉,符仁钰,李麟,朱晓东.低碳Si-Mn系TRIP钢的热处理工艺对组织的影响[J].金属热处理,2003,28(1):59-62. 被引量:26

共引文献52

同被引文献15

  • 1何建中,刘雅政,史秉华,刘清友,王雪莲,李德刚.Q345含Nb低碳钢CSP轧制时动态再结晶的研究[J].特殊钢,2005,26(3):9-11. 被引量:5
  • 2刘胜新,陈永,赵志毅,薛润东,李杏娥,范金辉.微合金元素对Q345钢奥氏体晶粒粗化行为的影响[J].铸造技术,2006,27(10):1071-1074. 被引量:9
  • 3张云祥,徐光,赵刚,赵嘉蓉,周峰.CSP与常规热轧工艺生产Q345B钢带的组织性能对比[J].钢铁研究,2007,35(1):30-32. 被引量:6
  • 4黄青松,李龙飞,杨王玥,孙祖庆.共析钢的过冷奥氏体动态相变和组织超细化[J].金属学报,2007,43(7):724-730. 被引量:26
  • 5Zhu G, Subramanian S V. Ultra-fin grain size control and mixed grains elimination in industrial multi-pass rolling processing [J]. Materials Science and Engineering,2006,426: 235-239.
  • 6Mintz B.The Influence of composition on the hot ductility of steel and to the problem of transverse Cracing[J].ISU International,1999,39(9):833-855.
  • 7Wu S E Q,Han E H,Ke W.Effects of dynamic strain aging on mechanical properties of SA508 class 3 reactor pressure vessel steel.Springer[J],2009,(25):1-8.
  • 8Kim J H,Yoon E P.Notch position in the HAZ specimen of reactor pressure vessel Steel[J].Journal of Nuclear Materials,1998,(257):303-308.
  • 9Kim Sangho,Kang Suk Young.Correlation of the Microstructure and Fracture Toughness of the Heat-Affected Zones of an SA508 Steel[J].Metallurgical and Materials Transactions,2000,(31):1107-1117.
  • 10Seifert H P,Ritter S,Environmentally-assisted cracking behavior in the transition region of an Alloy182/SA 508 Cl.2 dissimilar metal weld joint in simulated boiling water reactor normal water chemistry environment[J].Journal of Nuclear Materials.2008,(378):197-210.

引证文献2

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部