摘要
LDPE经熔融接枝MAH后,提高了涂层的附着力和机械性能,其他性能不变。
出处
《材料保护》
CAS
CSCD
北大核心
1997年第2期37-38,共2页
Materials Protection
参考文献3
-
1柳帜秋，粉末涂料与涂装，1993年，3卷，4期，5页
-
2欧英鸿，塑料手册，1991年
-
3陈安迪，粉末涂料与涂装技术，1986年
同被引文献16
-
1翟兰兰 凌国平.纳米改性聚乙烯与金属附着力的初步探讨[J].材料科学与工程学报,2004,22:4-6.
-
2PARK S J,JIN J S.Effect of Corona Discharge Treatment on the Dyeability of Low-Density Polyethylene Film[J].Journal of Colloid and Interface Science,2001,236(1):155-160.
-
3BRETAGNOLA F,TATOULIANA M,AREFI-KHONSARIA F,et al.Surface modification of polyethylene powder by nitrogen and ammonia low pressure plasma in a fluidized bed reactor[J].Reactive & Functional Polymers,2004,61(2):221-232.
-
4KATO K.Investigation of high-density polyethylene film surface treated with chromic acid mixture by use of 2,4-dinitrophenylhydrazine.Ⅱ.Film surfaces treated at 70 ℃[J].Journal of Applied Polymer Science,1977,21(10):2 735-2 743.
-
5BRIGGS D,BREWIS D M,DAHM R H,et al.Analysis of the surface chemistry of oxidized polyethylene:comparison of XPS and TOF-SIMS[J].Surface and Interface Analysis,2003,35(2):156-167.
-
6TENG CUIQING,YU MUHUO.Grafting of multifunctional groups onto the surface of high-strength polyethylene fibers and the interface of their composites[J].Journal of Applied Polymer Science,2005,97 (2):449-454.
-
7KAUR I,GUPATA A,MISRA B N,et al.Functionalization of polyethylene film by radiochemical grafting for use as membranes in seawater desalination[J].Desalination,1997,110 (1-2):115-127.
-
8CHISHOLM N,MAHFUZ H,RANGARI V K,et al.Fabrication and mechanical characterization of carbon/SiC-epoxy Nanocomposites[J].Composite Structures,2005,67 (1):115-124.
-
9MAHFUZ H,RANGARI V K,ISLAM M S,et al.Fabrication,synthesis and mechanical characterization of nanoparticles infused polyurethane foams[J].Composites:Part A,2004,35:453-460.
-
10SHANTALII T A,KARPOVA I L,DRAGAN K S,et al.Synthesis and thermomechanical characterization of polyimides reinforced with the sol gel derived nanoparticles[J].Science and Technology of Advanced Materials 2003,4:115-119.
-
1牟鸿源,侯仰圣,赵艳莉,王戬涛.无滴剂的研究[J].内蒙古石油化工,2008,34(2):7-7.
-
2周延辉.熔融接枝聚丙烯亲水性能的研究[J].化工新型材料,2009,37(9):101-103. 被引量：3
-
3项东升,王懿华,秦恒飞,陆鸿飞.水相法氯化聚丙烯用马来酸酐接枝改性与性能研究[J].应用化工,2013,42(1):44-46. 被引量：3
-
4毛晨曦.苯乙烯在甲基丙烯酸缩水甘油酯熔融接枝PE中的作用[J].聚合物与助剂,2016,0(2):14-24.
-
5马向东,刘大壮,孙培勤.氯化聚丙烯接枝马来酸酐的合成研究[J].涂料工业,2007,37(7):29-31. 被引量：7
-
6马向东,刘大壮,孙培勤.氯化聚丙烯接枝马来酸酐的研究[J].应用化工,2008,37(4):385-386. 被引量：4
-
7刘煜平,蒋欣,黄玲,靳东杰,刘治猛.含蓖麻油的水性聚氨酯乳液的稳定性和膜的耐水性研究[J].广西大学学报（自然科学版）,2003,28(2):95-98. 被引量：12
-
8李云鹏,刘书静,冯涛.丙烯酸/马来酸酐/甲基丙烯酸甲酯涂料分散剂的合成研究[J].河北化工,2012,35(12):36-38. 被引量：1
-
9祝佳丽,吴淼,魏无际,黄健.MAH等离子体改性PVDF薄膜表面的亲水性研究[J].化工新型材料,2009,37(11):55-57. 被引量：7
-
10张敏娟,庞衍松.反应性聚乙二醇与环氧丙烯酸树脂共混改性及其涂膜性能的研究[J].中国涂料,2013,28(12):31-34.
