出处
《上海汽车》
2007年第8期39-41,共3页
Shanghai Auto
参考文献5
1 宋才飞.中国压铸产业的发展特征与规律[J] .世界有色金属,2006(7):59-63. 被引量:2
2 杜文博,吴玉锋,左铁镛.镁合金在交通工具中的应用现状[J] .世界有色金属,2006(2):19-21. 被引量:31
3 宋志海.汽车用铝合金及其塑性加工技术[J] .铝加工,2006,29(6):39-42. 被引量:3
4 2005年全球铸件生产统计报告[J] .铸造,2007,56(2):220-221. 被引量:2
5 李琳琳,张治民.汽车用镁合金及其塑性加工技术[J] .轻合金加工技术,2005,33(11):9-11. 被引量:8
二级参考文献22
1 张屹林,王洪民,王海涛,赵士博.汽车轻量化与铝合金[J] .内燃机配件,2004(5):37-40. 被引量:17
2 姜玉波.铝合金材料在汽车轻量化中的应用分析[J] .试验技术与试验机,2004,44(3):31-33. 被引量:15
3 刘静安.铝合金锻压生产现状及锻件应用前景[J] .轻合金加工技术,2005,33(6):1-4. 被引量:15
4 冯美斌.汽车轻量化技术中新材料的发展及应用[J] .汽车工程,2006,28(3):213-220. 被引量:142
5 Ogawa N, Shiomi M, Osakada K. Forming Limit of Magnesium Alloy at Elevated Temperate for Precision Forging[ J ]. Int. J. Machine Tools and Manufacture, 2002,42: 607 - 614.
6 Friedrich H, Schumarn S. The Second Age of Magnesium Research Strategies to Bring the Automotive Industry' s Vision to Reality[A]. Proceeding of the Second Israeli International Conference on Magnesium Science & Technology[ C ]. 2000, Dead sea, Israel, 9 - 18.
7 Ben-Artzy A, Shtechman A, Ben-Ari N, et al. Plastic Deformation of Wrought Magnesium Alloys AZ31, ZK60[A].Proceeding of the Second Israeli International Conference on Magnesium Science & Technology[C]. 2000, Dead Sea,Israel, 151 - 158.
8 Rosta F H,et al. Magnesium in the Volkswagen[J] .Light Metal Age, 1980, (8).
9 Enss J,Evertz T,Reier T,et al.New Magnesium Rolled Productions for Automobile Applications[A ] .Proceedings of the Second Israeli International Conference on Magnesium Science & Technology[C].2000, Dead Sea, Israeli, 19 - 34.
10 Decker R F. The Renaissance in Magnesium[J] .Advanced Meterials & Process, 1998, (2).
共引文献41
1 肖峰,刘江文.镁合金在摩托车及自行车上的应用现状及前景展望[J] .材料研究与应用,2006(4):289-291. 被引量:1
2 宋珂.镁合金在汽车轻量化中的应用发展[J] .机械研究与应用,2007,20(1):14-16. 被引量:23
3 曾艺成,李克锐,张忠仇.为铸造厂生产优质铸造生铁已刻不容缓[J] .现代铸铁,2007,27(4):57-60. 被引量:6
4 刘倩,单忠德.镁合金在汽车工业中的应用现状与发展趋势[J] .铸造技术,2007,28(12):1668-1671. 被引量:26
5 张洪信,姜勇,张铁柱,张纪鹏.铝合金压力铸造技术的现状与展望[J] .铸造,2007,56(12):1247-1250. 被引量:23
6 胡斌,彭立明,曾小勤,卢晨,丁文江.镁合金在汽车领域中的应用(一)——镁合金在汽车领域的应用背景和发展现状[J] .铸造工程,2007,31(4):34-39. 被引量:4
7 范晋平,张俊远,王社斌,金俊,王帅,许并社.AM60镁合金精炼过程中镁的蒸发研究[J] .太原理工大学学报,2008,39(3):245-248. 被引量:1
8 赵晴,章志友,刘月娥.电流密度对MB8镁合金微弧氧化膜耐蚀性的影响[J] .材料保护,2008,41(9):1-4. 被引量:4
9 廖慧敏,龙思远,蔡军.高应变率对AM60镁合金力学性能的影响[J] .机械工程材料,2009,33(1):83-85. 被引量:5
10 罗建峰,方奶云.自行车飞轮失效原因探究[J] .金属热处理,2009,34(5):110-113. 被引量:1
同被引文献71
1 苏鸿英.德国宝马公司采用镁铝复合材料生产汽车部件[J] .世界有色金属,2004(8):47-48. 被引量:1
2 夏德宏,余涛.高速发展的绿色工程材料——金属镁[J] .金属世界,2004(6):41-42. 被引量:10
3 夏德宏,郭梁,余涛.镁及镁合金广阔的应用前景[J] .金属世界,2005(2):47-48. 被引量:12
4 崔红卫,刘俊成,耿浩然.Ca和Ba对镁合金AZ63的燃点与熔体粘度的影响[J] .铸造技术,2005,26(11):1049-1053. 被引量:4
5 李琳琳,张治民.镁合金塑性成形技术及其在汽车工业中的应用[J] .有色金属加工,2005,34(6):35-37. 被引量:2
6 咸奎峰,张辉,陈振华.变形镁合金板成形工艺研究现状[J] .材料导报,2005,19(F11):413-416. 被引量:1
7 杨程,杜红星,刘晓平.镁合金在3C产品中应用现状及前景展望[J] .铸造设备研究,2005(6):46-49. 被引量:18
8 杜文博,吴玉锋,左铁镛.镁合金在交通工具中的应用现状[J] .世界有色金属,2006(2):19-21. 被引量:31
9 咸奎峰,张辉,陈振华.AZ31镁合金板温拉深流变应力行为研究[J] .锻压技术,2006,31(3):46-49. 被引量:11
10 傅霖.略论铝合金和镁合金在汽车工业中的应用[J] .汽车工艺与材料,2006(8):8-12. 被引量:7
引证文献7
1 廖慧敏,龙思远,蔡军.高应变率对AM60镁合金力学性能的影响[J] .机械工程材料,2009,33(1):83-85. 被引量:5
2 廖慧敏,龙思远,蔡军.应变速率对AZ91D镁合金力学行为影响[J] .材料科学与工艺,2010,18(1):120-123. 被引量:7
3 魏宝丽,夏显明,陈丰,张华.AZ31、AZ61和AZ91变形镁合金板温拉成形实验研究[J] .热加工工艺,2011,40(9):9-12. 被引量:7
4 陈晓,许彩凤.FeS_2/Air气氛中熔炼AZ91D镁合金试验[J] .特种铸造及有色合金,2012,32(2):119-122. 被引量:3
5 李善锋,董大伟,朱立东.合金材料在汽车车轮制造中的应用[J] .热加工工艺,2014,43(19):10-13. 被引量:7
6 徐海港,张鑫,王通,潘胜祥.电动车辆双电机减速器结构设计[J] .农业装备与车辆工程,2017,55(6):33-35. 被引量:1
7 冯世鹏,陈翌庆,刘一,朱子昂,周锐.Nd对Mg/Al-20Si液固复合铸造界面组织及性能的影响[J] .特种铸造及有色合金,2018,38(7):755-759. 被引量:5
二级引证文献34
1 辜诚,程进,闻福林,赵建华.固-液复合铸造制备双金属复合材料的研究进展[J] .特种铸造及有色合金,2022,42(6):681-687. 被引量:4
2 王俊龙,蒋文明,管峰,李广宇,张政,樊自田.振动频率对消失模铸造Al/Mg复合材料界面组织和力学性能的影响[J] .特种铸造及有色合金,2022,42(6):672-677. 被引量:1
3 李保成,赵家萍,武灿明.柱形弹丸高速冲击变形和开裂研究[J] .兵器材料科学与工程,1990,13(7):13-17.
4 毛萍莉,刘正,王长义,王峰.镁合金高速冲击载荷下的变形行为研究进展[J] .材料导报,2012,26(7):95-101. 被引量:11
5 张华,陈丰,夏显明.AZ31、AZ91镁合金薄板热拉伸成形规律的实验研究[J] .热加工工艺,2013,42(5):11-13. 被引量:13
6 彭剑,周昌玉,代巧,贺小华,唐支翔,杜永勤.工业纯钛室温下的应变速率敏感性及Hollomon经验公式的改进[J] .稀有金属材料与工程,2013,42(3):483-487. 被引量:16
7 毛萍莉,席通,刘正,董阳,于金程.高温高应变率下AM60B镁合金力学性能及失效行为[J] .沈阳工业大学学报,2013,35(5):515-519. 被引量:8
8 张小兵,李建明,刘伟成.AZ31镁合金板材差温拉深数值模拟[J] .热加工工艺,2013,42(21):118-121.
9 李超,原梅妮,郎贤忠,李立州.基于SiCp/AZ91D复合材料真实微观结构建立的简化模型[J] .河北农机,2014(4):39-40.
10 唐平洋,杨建元,柴东朗.镁合金熔炼保护气体研究现状和展望[J] .浙江化工,2014,45(6):28-32. 被引量:2
1 韩一飞,任豪.浅谈高分子材料在汽车领域的应用及发展[J] .科技致富向导,2011(14):66-66.
2 未来汽车材料的主流[J] .汽车零部件,2010(2):27-28.
3 胡锦达.浅谈新材料在汽车上的应用[J] .科技风,2009(9).
4 肖永清.低碳经济助力轻量化材料,驱动汽车的未来[J] .市场研究,2010(7):25-29. 被引量:1
5 肖永清.低碳节能为汽车新材料产业发展插上腾飞的翅膀[J] .交通与运输,2011,27(1):60-61.
6 燕来荣.铝合金车轮轻装上路——现代汽车安全、环保、节能的最佳选择[J] .汽车运用,2007(9):17-19.
7 晓青.现代汽车制造金属材料的应用及发展方向[J] .上海汽车,2004(9):40-42. 被引量:2
8 程振彪.汽车制造愈来愈多地使用轻质材料[J] .轻型汽车技术,2000(4):106-108.
9 吕少卉.汽车制造材料的发展[J] .汽车维修,2008(5):42-43. 被引量:1
10 何京.应用在汽车上的铝合金[J] .汽车运用,2007(3):32-33.
;