期刊文献+

残膜分离筛机构的运动仿真与分析 被引量:30

Motion simulation and analysis of separating sieve mechanism for scrap plastic film
下载PDF
导出
摘要 研究残膜、残茬与土壤分离装置,建立残膜分离筛运动数学模型,分析残膜等物料在筛面上的运动规律。利用Pro/Engineer软件建立了分离筛的三维模型,通过分析与仿真,优化分离筛机构的结构参数和运动参数,有效地提高残膜的分离率,减小分离筛因往复惯性力引起的振动。试验表明,分离筛的振动频率对残膜的分离率影响较大。当飞轮转速为175r/min时,分离筛有较强的分离能力,且运转比较平稳。 A kind of separating sieve that can detach scrap plastic film and cotton stubble from earth was researched. Mathematical model for motion of separating sieve was established. Motion law of scrap plastic film and sundries on the separating sieve was analyzed. Three-dimensional model for the separating sieve was made with Pro/Engineer software. By means of motion simulation, structural parameters and motion parameters of the separating sieve were optimized. Therefore, separating rate of scrap plastic film increased effectively and its vibration decreased. Experiments indicated that vibration frequency of the separating sieve was the main factor which affects separating rate of scrap plastic film. Separating rate of the separating sieve increases and the machine operates stably when flywheel turns at a speed of 175 r/min.
出处 《农业工程学报》 EI CAS CSCD 北大核心 2007年第7期113-116,共4页 Transactions of the Chinese Society of Agricultural Engineering
基金 国家科技攻关计划西部开发科技行动计划重大项目(2005BA901A24) 新疆生产建设兵团高新技术研究发展计划项目(2006GJS20)
关键词 残膜 分离筛 运动分析 scrap plastic film separating sieve motion analysis
  • 相关文献

参考文献16

二级参考文献73

共引文献347

同被引文献368

引证文献30

二级引证文献533

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部