摘要
分析了对称式三辊卷板机的受力状况。在对卷板过程变形力能参数分析的基础上,将其受力与设备的驱动功率直接建立联系,通过功能转换计算,得出了卷板机主驱动系统的驱动功率的一种计算方法。经算例分析证明:该方法简化了卷板机选择设备动力的功率计算,计算结果更为符合实际。
The bearing force analysis of three rollers veneer reeling machine of symmetrical type was carried out. On the base of the ability analysis in transform, the direct contact between bearing force and driving power on equipment was established. Through the function conversion calculation, the calculating method of driving power on the main drive system was given. The deducing process was simple and could be understood easily. The results of calculated example show that this method simplifies the choice of driving power on equipment. The calculated result is further accorded with the actual circumstance.
出处
《锻压技术》
CAS
CSCD
北大核心
2007年第4期67-69,共3页
Forging & Stamping Technology
关键词
卷板机
受力分析
驱动功率
rolling machine
stress analysis
driving power