水平射流钻头真空扩散焊接试验研究

Study of Vacuum Diffusion Bonding for Horizontally Projected Jet Bit

针对水平射流钻头钎焊工艺存在的问题,采用真空扩散焊接工艺,研究了焊接温度、焊接压力和焊接时间等工艺参数对焊缝质量的影响,并确定了最佳焊接工艺参数;水压试验表明,用真空扩散焊接制造的水平射流钻头焊缝致密性好,在70 MPa压力下无泄漏。

Aiming at the existing problems of brazing technique for horizontally projected jet bit, the influence of bonding temperature, pressure and time on the quality of the welding seam was investigated by means of vacuum diffusion bonding, and the optimum technological parameters for high-quality welding seam were determined. Water pressure test shows that the compactness of the welding seam of horzzontally projected jet bit manufactured by vacuum diffusion bonding is fine and no puncture occurs at 70MPa pump pressure.