摘要
介绍一种实用的脱墨废水三级处理技术的原理、工艺流程、主要构筑物,并重点探讨了在各级处理过程中的控制参数和影响因素。应用该工艺建造的某大型造纸厂的脱墨废水处理工程,处理出水达到了《污水综合排放标准》(GB8978-1996)中二级标准。针对该处理系统实际运行中出现的问题,提出了相应的解决措施,可供同行借鉴和参考。
An advanced process for treating de-inking wastewater is described.The principles,schematic flow diagram,and major structures of this advanced treatment process are presented,and the effects of parameters of design and operation of this process are discussed.A de-inking wastewater treatment project has been set up using this process in a big papermaking factory.The effluent water from this process meets the limits of the class two in the National Comprehensive Wastewater Discharge Standards (GB8979-1996).Measures have been proposed to troubleshoot the problems in the oepration of this process.
出处
《环境工程》
CAS
CSCD
北大核心
2007年第4期28-30,共3页
Environmental Engineering
基金
教育部新世纪优秀人才支持计划项目(NCET-05-0701)
中国博士后科学基金资助项目(2005037206)
关键词
脱墨废水
有机物
活性污泥法
强氧化法
污水处理
de-inking wasterwater, organic compounds, activated sludge process, advanced oxidation technology and wasterwater treatment
