基于嵌入式调试器的网络通信方法设计与实现

Design and Implementation of Ethernet Communication Method Based on Embedded Debugger

本文介绍了在嵌入式调试器中如何通过以太网口进行嵌入式软件调试,实现了主机与开发板之间的网口通信。针对具体的嵌入式开发板S3C4510B对网口驱动和网络协议进行了研究,裁减了网口驱动和网络协议的冗余部分,既保证了调试器可以通过以太网进行远程调试,又能满足嵌入式系统对资源占用的要求。

This paper introduces how to debug embedded software by Ethemet interface in the embedded debugger. The network communication between the host computer and the board has been implemented. To study the Ethemet driver and network protocol is aimed at the embedded board S3C4510B, and the redundant part has been deleted. This implementation both insures the remote debugging by Ethemet and satisfies the request that the embedded system calls for the embedded resources.