摘要
采用金属粉末、空气中液相烧结的方法制备了粉末冶金高铝锌基ZA27合金。结果表明,在410~435℃烧结2h时,425℃时烧结体的摩擦系数最小,耐磨性最好,随着烧结时间的增加,摩擦系数减小,耐磨性提高,在425℃烧结4h、5h时,烧结体的耐磨性与铸造ZA27合金相比有显著提高。
The powder metallurgy of high Aluminum Zn-based alloy ZA27 was prepared by means of pure metal powder and liquid phase sintering in air.The results show that the friction coefficient of P/M alloy sintered at 425 ℃ is minimum and its wear resistance is best when sintered at 410-435℃ for 2 h.With the increase of sintering time, its friction coefficient reduces and wear resistance improves. Compared with ZA27 alloy as-cast, the wear resistance of P/M alloy sintered at 425℃for 4 h or 5 h improves obviously.
出处
《热加工工艺》
CSCD
北大核心
2007年第16期22-24,共3页
Hot Working Technology
关键词
粉末冶金
高铝锌基合金
液相烧结
powder metallurgy
high aluminum Zn-based alloy
liquid phase sintering