期刊文献+

750kV同塔双回线路接地开关的选择研究

Study on the Selection of Grounding Switch for 750 kV Double-circuit Transmission Lines on Same Tower
下载PDF
导出
摘要 针对750kV西宁-永登-白银输变电工程,使用电磁暂态程序(EMTP)计算了750kV同塔双回线路的感应电流、电压。通过对计算结果的分析并结合IEC标准,提出本工程750kV同塔双回线路接地开关的参数要求:电磁感应电流和电磁感应电压及静电感应电流满足B类标准要求,静电感应电压超出B类标准,要求为55kV。 This paper calculates the induction voltage and current of double-circuit transmission line on same tower in 750 kV xining-Yongdeng-Baiying project by EMTP. This paper calculates the induction voltage and current of 750kV double-circuit transmission line on same town using by Emtp. Based on the calculation results and IEC standard, the grounding switch's parameter is presented. For the grounding switch of this project, electromagnetic induction current and voltage and electrostatic induction current must meet type B standard. And electrostatic induction voltage exceeds the require of type B standard, that is 55 kV.
作者 谭海龙 席晓丽 项力恒 穆华宁 TAN Hai-long, XI Xiao-li, XIANG Li-heng, MU Hua-ning (Northwest Electric Power Design Institute, Xi'an 710075, China)
机构地区 西北电力设计院
出处 《电网与水力发电进展》 2007年第5期39-42,共4页
关键词 750 kV同塔双回线路 感应电压 感应电流 接地开关 电磁暂态程序 750 kV double-circuit transmission line induction voltage induction current grounding switch Emtp
  • 相关文献

参考文献2

二级参考文献4

  • 1Task Committee of the Structural Division of ASCE. Guide for Design of Steel Transmission Towers. ASCE, 1988
  • 2GB50018-2002.冷弯薄壁型钢结构技术规范.[S].,..
  • 3.苏联钢结构设计规范.[S].全国钢结构标准技术委员会,钢结构设计规范国家标准管理组,1993..
  • 4CECS102:2002.门式刚架轻型房层钢结构技术规程.[S].,..

共引文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部