期刊文献+

烧结参数对粗粉注射成形件性能的影响 被引量:2

Effect of Sintering Parameter on Performance of Injection Molding Part Made of Coarse Powder
下载PDF
导出
摘要 研究了烧结气氛和烧结温度对粗粉烧结件性能的影响。结果表明:烧结件的性能随烧结气氛中氢的含量的变化而变化。随着混合气氛中H2/N2比的增加,烧结收缩率、密度增加,而碳含量却随之降低;烧结件的性能随烧结温度的升高表现为先增高后降低。 The effect of sintering atmosphere and sintering temperature on performance of sintering part made of coarse powder was studied. The results show that the performance of sintering part changes along with hydrogen content in the sintering atmosphere. The sintering shrinkage ratio and density increases with the increase of the proportion between hydrogen and nitrogen in the mixed atmosphere, but the carbon content reduces with it; the performance of the sintering part increases first and reduces next with the increase of sintering temperature,
出处 《热加工工艺》 CSCD 北大核心 2007年第17期24-26,共3页 Hot Working Technology
基金 江苏省教育厅自然科学基金资助项目(06KJD460016) 淮海工学院自然科学基金资助项目(Z2006025)
关键词 金属注射成形 烧结参数 烧结性能 MIM sintering parameter sintering performance
  • 相关文献

参考文献7

  • 1Hauk P A.Powder injection molding:Current a long term outlook[J].The International Journal of Powder Metallurgy,2000,36(30):29-33.
  • 2German R M.Scientific status of metal powder injection molding[J].International Journal of Powder Metallurgy,2000,36(3):31-36.
  • 3KULKANRNI K M.Future looking bright for PIM[J].Metal Powder Report,2000,55(10):40-42.
  • 4曲选辉,李益民,黄伯云.金属粉末注射成形技术[J].高技术通讯,1997,7(12):54-57. 被引量:15
  • 5Kiyotaka Kato.Effect of Sintering Temperature on Density and Tensile Properties of Titanium Compacts by Metal Injection Molding[J].Journal of the Japan Society of Powder and Powder Metallurgy,1999,46(8):865-869.
  • 6张健,黄伯云,李益民,钟伟,曲选辉.烧结气氛对注射成形Fe/2Ni合金性能的影响[J].中南工业大学学报,2000,31(2):152-155. 被引量:2
  • 7岳建岭,李益民,张健.注射成形Fe-50 %Ni 软磁合金的研究[J].粉末冶金工业,2003,13(4):6-9. 被引量:4

二级参考文献6

共引文献18

同被引文献11

  • 1詹添印,庄明勋,林舜天.还原铜粉之注射成形[J].粉末冶金技术,2005,23(2):129-133. 被引量:5
  • 2卢仁伟,李笃信,赵志刚,李益民.铜粉末注射成形工艺[J].粉末冶金材料科学与工程,2006,11(2):104-108. 被引量:7
  • 3Moballegh L, Morshedian J, Esfandeh M. Copper injection molding using a thermoplastic binder based on paraffin wax [J]. Materials Letters, 2005, 59:2832-2837.
  • 4GermanRM 曲选辉 刘绍军 乐红胜 译.粉末注射成形[M].长沙:中南大学出版社,2001..
  • 5German R M.粉末注射成形[M].长沙:中南大学出版社,2001.
  • 6Shane Taylor.Another'Home'Metal 3D Printer:Newton 3D[EB].http://3dprintingindustry.com/2013/12/24/another-home-metal-3d-printer-newton-3d/.2013-12-24.
  • 7低成本金属3D打印技术研发获突破性进展[EB],天工社3D打印,http://maker8.com/article-2451-1.html,2014-12-12.
  • 8Gunduz M.Cadirli E.Directional solidification of aluminum-copper alloys[J].Science and Engineering,2002,A327:494-499.
  • 9En-Kyul Yu,Longhai Piao,Sang-Ha Kim.Sintering behavior of copper nanoparticles[J].Bull.Korean Chem.Soc,2011,32(11):4009.
  • 10王树杰,任海萍,樊云昌.真空烧结工艺参数对铜粉烧结性能的影响[J].热加工工艺,2009,38(16):65-67. 被引量:4

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部