期刊文献+

纳米掺杂Al_2O_3/ZrO_2等离子喷涂涂层的组织及性能 被引量:5

Microstructure and performance of nano-doping Al_2O_3/ZrO_2 plasma spray coatings
下载PDF
导出
摘要 利用自行研制的纳米掺杂AZ-20热喷涂粉末,采用大气等离子喷涂技术,在35号钢基体上制备Al2O3/ZrO2复合材料热障涂层,对涂层的组织结构及性能进行分析。结果表明:制备的涂层是由四方结构的t′-ZrO2与六方结构的α-Al2O3构成的,具有纳米晶与微米晶混晶组织;涂层孔隙率为11.2%,孔隙尺度较均匀;涂层硬度HV100为702,抗磨损能力较常规AZ-20涂层高约25%;涂层具有良好的隔热性能。 The thermal barrier coating of A1203/ZrO2 composite coatings on 35^# steel substtate were prepared by the air plasma spraying with self-developed AZ-20 nano-doping thermal spray powder. The coating corlsists of cubic t'-Zr02 and hexagonal structure a-A1203 in nanometer and micrometer; the coating has the uniform porosity of 11.2% and hardness HVi00 of 702. Its antiwear ability succeeds that of AZ-20 by about 25%; the coating has good thermal insulation performance.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2007年第9期1397-1403,共7页 The Chinese Journal of Nonferrous Metals
基金 国家自然科学基金资助项目(50372054)
关键词 A12O3/ZrO2 等离子喷涂 热障涂层 隔热性能 A12O3/ZrO2 plasma spray thermal barrler coating thermal insulation performance
  • 相关文献

参考文献19

  • 1Frank H A, Kreye G H. Bonding mechanism in cold gas spraying[J]. Acta Materialia, 2003, 51(15): 4379-4394.
  • 2Miller R A. Thermal barrier coatings for aircraft engines: History and directions[J]. Journal of Thermal Spray Technology, 1997, 6(1): 35-42.
  • 3Czech N, Fietze k H, Lorenzo J Z. Metal studies of the bond 2 coat oxidation and phase structure of TBCs [J]. Surf Coat Techn, 1999, 113(1/2): 157.
  • 4Tsai P C, Hsu C S. High temperature corrosion resistance and microstructural evaluation of laser glazed plasma sprayed zirconia/MCrAlY thermal barrier coating[J]. Surface and coating Technology, 2004, 183(1): 29-34.
  • 5张红松,王富耻,马壮,成志芳,王全胜,冼文锋.等离子喷涂ZrO_2涂层孔隙定量分析[J].材料工程,2006,34(z1):407-410. 被引量:19
  • 6周宏明,易丹青,余志明,肖来荣.热障涂层的研究现状与发展方向[J].材料导报,2006,20(3):4-8. 被引量:34
  • 7姜超,丁洁,李爱国,武兵书,陈蕴博.Al_2O_3与ZrO_2复合粉涂层的组织形貌分析[J].金属热处理,2005,30(12):58-60. 被引量:8
  • 8HE M Y, Hutechinson J W, Evans A G.Simulation of stresses and delamination in a plasma-sprayed thermal barrier system upon thermal cycling[J]. Materials Science and Engineering A, 2003, 345: 172-178
  • 9Yanar N M, Meier G H, Pettit F S. The influence of platinum on the failure of EBPVD YSZ TBCs on NiCoCrAlY bond coats[J]. Scripta Materiallia, 2002, 46(4): 325-330.
  • 10Rangarai S, Kokini K. Estimating the fracture resistance of functionally graded thermal barrier coating from thermal shock tests[J]. Surface and Coating Technology, 2003, 173: 201-242.

二级参考文献104

共引文献125

同被引文献65

引证文献5

二级引证文献59

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部