期刊文献+

新型椭球网壳减震体系性能分析 被引量:6

Analysis of Vibration Reducing Performance on Innovation System of Ellipse Lattice Shell
下载PDF
导出
摘要 本文利用非线性有限元理论,对附加屈曲约束支撑的单层组合椭球网壳的减震性能进行了初步研究。假设钢材为理想弹塑性模型,通过大型有限元分析软件ANSYS编程进行参数化建模和具体实例分析;模型中的结构杆件采用Beam188单元,而支撑部件用Link8单元代替。对结构进行三维El-centro波作用下的动力响应分析,结果表明,这种附加屈曲约束支撑的网壳结构的关键点位移响应明显减小。基于分析结果,本文提出此类网壳屈曲约束支撑的一种布置方法,并对具体的支撑布置形式进行了分析研究,得出相关结论。 Nonlinear finite element method is applied to analysis ellipse lattice shell, and preliminary study on vibration reducing performance of single-layer combined ellipse lattice shell with BRB (buckling restrained braces) is carried out. During the course of the analysis, material nonlinearity is considered, and the perfect elastic-plastic modal is adopted as the material modal of steel. Software ANSYS is used for analysis. Beam188 unit is selected as structure member in the modal and link8 unit is used to brace member based on lhe main performance of the buckling restrained brace. The result shows that the displacement response of key-points on the shell equipped with buckling restrained braces decreases notability ,which works under the effect of 3-dimension El-centro wave. A kind of BRB arrangement scheme is put forward in this paper, and some specific studies on different BRB's shell are carried out, subsequently, relative conclusions are derived in the end.
作者 王秀丽 王磊
出处 《工程抗震与加固改造》 2007年第4期31-36,共6页 Earthquake Resistant Engineering and Retrofitting
基金 国家自然科学基金项目(50678078) 兰州理工大学优秀青年教师资助计划
关键词 非线性有限元 单层组合椭球网壳 ANSYS 屈曲约束支撑 nonlinear finite element ellipse lattice shell ANSYS buckling restrained brace
  • 相关文献

参考文献6

二级参考文献37

  • 1孙建恒,夏亨熹.网壳结构非线性动力稳定分析[J].空间结构,1994(1):25-31. 被引量:27
  • 2徐闻,孙建恒,姚洪涛,杜二霞.单层柱面正交异型网壳的动力特性研究[J].河北农业大学学报,2005,28(1):83-87. 被引量:1
  • 3范峰 沈世钊.单层球面网壳的粘滞阻尼器减振分析[A]..大型复杂结构的关键科学问题及设计理论研究论文集(2001)[C].哈尔滨,2002..
  • 4[19]Brown, A. P. ,Aiken, I. D. and Jafarazadeh, F. J. (2001).Buckling restrained braces provide the key to the seismic retro fit of the Wallace F. Bennett Federal Building. Modern Steel Construction, August, 29- 37.
  • 5[20]Wada, A. , Connor, J. , Kawai, H. , Iwata, M. , and Watanabe,A. (1992). Damage tolerant structures. Proceedings, 5th U.S. -Japan Workshop on the Improvement of Structural Design and Construction Practices, ATC 15 - 4, Applied Technology Council, San Diego, CA, 27-39.
  • 6[22]Wakabayashi, M. , Nakamura, T. , Kashibara, A. , Morizono,T. And Yokoyama, H. (1973). Experimental study of elastoplastic properties of precast concrete wall panels with built-in insulating braces, Summaries of Technical Papers of Annual Meeting,Architectural Institute of Japan, 1041 - 1044. (in Japanese)
  • 7[23]Inoue,K. and Sawaisumi S. (1992). Bracing design criterion of the reinforced concrete panel including unbonded steel diagonal braces,Journal of Structural and Construction Engineering,Architectural Institute of Japan, 432, 41 49. ( in Japanese)
  • 8[24]Fujimoto, M. , Wada, A. , Saeki, E. , Watanabe, A. , and Hito mi,Y. (1988). A study on the unbonded brace encased in buckling-restraining concrete and steel tube. Journal of Structural Engineering,Architectural Institute of Japan, No. 034B,249-258. (in Japanese)
  • 9[25]Kalyanaraman, V. , Sridhara, B. N. , Mahadevan, K. , (1994).Sleeved column system." Proceedings, SSRC Task Group Meetings and Task Force Sessions, Lehigh University, Bethlehem, PA.
  • 10[26]Prasad,B. (1992). Experimental investigation of sleeved column, Proceedings, 33rd Structural Dynamics and Materials Conference,American Institute of Aeronautics and Astronau tics, Dallas.

共引文献197

同被引文献45

引证文献6

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部