期刊文献+

碳质双层纸基摩擦材料的制备与性能表征 被引量:1

The preparation and characterization of two-ply paper-based friction material containing carbon material
下载PDF
导出
摘要 使用造纸工艺制备了一种碳质双层纸基摩擦材料,采用TG-DTA热分析、惯量摩擦试验和定速摩擦试验研究了摩擦材料的耐热性能和摩擦磨损性能,获得了碳质双层纸基摩擦材料的静摩擦力矩曲线.试验结果显示,碳质双层纸基摩擦材料耐热性能良好,动摩擦稳定,静摩擦系数低,磨损率小,载荷适应性强,是一种适合于在高载荷条件下使用的低静/动摩擦系数比纸基摩擦材料. To exert the excellent tribological characteristics of carbon material, a two-ply paper-based friction material was successfully developed by paper making process. The thermal durability of the prepared material was investigated by TG-DTA analysis and the tribological performances were investigated with inertia friction tester and constant speed friction tester respectively. Additionaly, the static friction torque curve of such material was obtained for the first time. Results show that the twoply paper-based friction material, which has excellent thermal durability, stable dynamic coefficient of friction, low wear rate and low ratio in static/dynamic fiction, is suitable to be used in high load condition.
出处 《陕西师范大学学报(自然科学版)》 CAS CSCD 北大核心 2007年第3期57-60,共4页 Journal of Shaanxi Normal University:Natural Science Edition
基金 国家杰出青年基金资助项目(50225210)
关键词 双层纸基摩擦材料 碳材料 TG-DTA分析 摩擦磨损性能 摩擦力矩 two-ply paper-based friction material carbon material TG-DTA analysis friction and wear performance friction torque
  • 相关文献

参考文献9

  • 1Mikael H.Apparatus for measurement of engagement characteristics of wet clutch[J].Wear,1997,213:140-147.
  • 2Robert C L,Marc A Y,Yih F C.Fibrous lining material comprising a primary layer having less fibrillated aramid fibers and synthetic graphite and a secondary layer comprising carbon particles:USP,5998307[P].1999.
  • 3Suzuki Makoto,Mori Masahiro.Wet friction material:USP,6231977[P].2001.
  • 4Robert C L.Fibrous base material for a friction lining material composing less fibrillated aramid fibers and carbon fiber:USP,6130176[P].2000.
  • 5Kearsey A,Wagner D.Carbon fiber for wet friction applications[J].SAE Technical Paper,1997,97(754):29-48.
  • 6Mccorod H L.Resin-based friction material comprising aramid,acrylic and carbon fibers in a phenolic binder:USP,5478642[P].1995.
  • 7Nakazawa S,Oakada K,Kunugi T.Wet friction characteristics of new resilient graphitic friction material[J].Transactions of the Japan Society of Mechanical Engineers(Part C),1994,60(572):1 376-1 381.
  • 8Jang J Y,Khonsari M M.On the formation of hot spots in wet clutch systems[J].ASME,Journal of tribology,2002,124:336-345.
  • 9Coby L D,Farshid S,Charles M K.A simplified approach to modeling thermal effects in wet clutch engagement:analytical and experimental comparison[J].ASME,Journal of tribology,2000,122:110-118.

同被引文献11

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部