摘要
采用高倍显微组织观察、力学性能测试等手段,讨论了铝铁系合金在压铸条件下的组织、性能,以及压铸过程中存在的问题。表明压铸铝铁合金的抗拉强度σb可达到242.3MPa,伸长率δ可达到2.7%,显微组织中存在尺寸小的短棒状相,而且压铸试棒组织呈圆环带状分布。
Microstructure and properties of die casting Al-Fe alloy were investigated by SEM (scanning electron microscope) and mechanical property testing, and the problems existed in the die casting process were described. The tensile strength and elongation of the die acsting Al-Fe alloy can reach 242.3 MPa and 2.7%, respectively. There exists small short rod phase in the microstructure, and the ring and strip-like microstructure is distributed in the die casting rod.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2007年第9期698-701,共4页
Special Casting & Nonferrous Alloys
基金
教育部博士点基金资助项目(20050422024)
关键词
AL-FE合金
压铸
耐热合金
Al-Fe Alloy, Die Casting, Heat Resistant Alloy