陶瓷结合剂cBN砂轮的组织均匀化对其磨削性能的影响
摘要
文章探讨陶瓷结合剂cBN砂轮的组织均匀性对其磨削性能的影响。为了弄清组织均匀性对磨削中切刃特性的影响,用按传统制造法和新开发的"涂覆法"制作的两种cBN集束砂轮("传统集束砂轮"和"均匀集束砂轮")进行集束磨削试验。均匀集束砂轮磨削时平均磨粒切刃径向磨损小于传统集束砂轮。此外,通过砂轮组织的均匀化,发生在砂轮工作面上的cBN磨粒的破碎和脱落受到了抑制,因此均匀集束砂轮磨削时各磨粒切刃径向磨损的变化比传统集束砂轮小。
出处
《超硬材料工程》
CAS
2007年第4期46-51,共6页
Superhard Material Engineering
参考文献10
-
1[1]Webster and M.Tricard:Innovation in Abrasive Products for Precision Grinding[J].Annals of the CIRP,2004,53 (2):597.
-
2[2]D.J.Stephenson,T.Jin and J.Corbett:High Efficiency Deep Grinding of a Low Alloy Steel with Plated cBN Wheels[J].Annals of the CIRP,2002,51(2):241.
-
3[3]V.Varghese,C.Guo,s.Malkin and G Xiao:Energy Partion for Grinding of Nodular Cast Iron with Vitrified cBN Wheels,Mach[J].Sci.Technol.,2000,4 (2):197.
-
4[4]M.P.Hichiner and S.B.McSpadden:Evaluation of factors Controlling cBN Abrasive Selection for Vitrified Bonded Wheels[J].Annals of the CIRP,2005,54 (1):277.
-
5[5]Y.Ichida and K.Kishi:The development of Nanocrystalline cBN for Enhanced Superalloy Grinding Performance[J].ASME J.of Manuf.Sci,and Eng.,1997,119(1):110.
-
6尾野 仁,市田良夫,佐藤隆之介,木南宏隆,星野和友,佐藤政和.組織の均一化に基づく高性能ビトリフアイドcBNホイ一ルの開發研究[J].精密工学会志,1979,28(1):149.
-
7[7]K.V.Kumar and M.C.Shaw.A New Method of Characterizing Gi/rinding[J].Annals of the CIRP,1979,18(1):205.
-
8[8]K.Kishi and Y.Ichida:Electron Microfractography of Cutting Edges of Borazon cBN Abrasives,Proc.of the 20th Japan Congress Materials Research[J].1977,142.
-
9[9]M.C.Shaw.Principles of Abrasive Processing Oxford University Press[J].1996,96.
-
10[10]S.Malkin.Grinding Technology-Theory and Application of Machining with Abrasives-,Ellis Horwood Ltd and John Wiley & Sons,1989.61.
-
1陈卫东,涂俊群.不同的造孔剂对陶瓷结合剂cBN砂轮性能的影响[J].超硬材料工程,2014,26(3):1-5. 被引量:7
-
2蒋燕麟,罗建平.陶瓷结合剂cBN砂轮研究进展[J].超硬材料工程,2009,21(2):52-55. 被引量:6
-
3庞吉华.碳酸钠的制造法[J].国外制碱,1992(8):1-5.
-
4张富生.四溴双酚A的制造方法[J].海湖盐科技资料,1998(9):29-33.
-
5宇田雅宏,刘士仪.精细陶瓷超微粒的新制造法[J].国外建材(武汉),1989,10(3):48-53.
-
6陈日月,刘小磐.Na_2O含量对CBN砂轮陶瓷结合剂性能的影响[J].超硬材料工程,2005,17(6):14-16. 被引量:9
-
7张永杰,徐晓伟,吴卫江,刘志甫,李玉萍.LiF和B_2O_3在Al-Si-O陶瓷结合剂中的作用[J].北京科技大学学报,1999,21(3):255-257. 被引量:5
-
8肖乐银,刘志环,蒋燕麟,罗建平.陶瓷结合剂cBN高速砂轮受力分析[J].超硬材料工程,2008,20(2):19-21. 被引量:1
-
9宁长红.氢氧化钠对立方氮化硼质量的影响[J].金刚石与磨料磨具工程,2002,22(2):38-38. 被引量:1
-
10那洪玉.炭黑成型体及其制法[J].炭黑译丛,2001(9):1-4.