期刊文献+

电弧离子镀氮化铬涂层的高温氧化 被引量:6

Effects of Titanium Aluminum Nitride Coatings on the Mechanical Performance of Steel 1Cr11Ni2W2MoV
下载PDF
导出
摘要 利用电弧离子镀设备在1Cr11Ni2W2MoV不锈钢基体上沉积了CrN涂层,对涂层的抗氧化性能进行了研究。结果表明,CrN氧化生成Cr_2O_3,氧化反应激活能小于Cr和Cr_2N的氧化反应激活能,具有低的氧化速率常数,抗氧化性能良好。氧化过程中发生CrN向Cr_2N的相转交,涂层中大的压应力的存在对这一转变起了关键作用。 Owing to the excellent mechanical property and oxidation-resistance, chromium nitride coating is considered the one of the alternative of titanium nitride. In this study chromium nitride coating was deposited on a wrought martensite steel 1Crl 11Ni2W2MoV by arc ion plating system with optimal processing parameters and the oxidation-resistance of the coating was investigated. It was shown that the CrN coating showed excellent oxidation-resistance and Cr2N was formed during the oxidation process due to the existence of compressive stress in the coating.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2007年第A02期699-702,共4页 Rare Metal Materials and Engineering
基金 国家自然科学基金项目(59971052) 江西省自然科学基金项目(0650034)资助
关键词 电弧离子镀 氮化铬涂层 高温氧化 chromium nitride coating oxidation-resistance arc ion plating
  • 相关文献

参考文献15

  • 1闻立时,黄荣芳.离子镀硬质膜技术的最新进展和展望[J].真空,2000,37(1):1-11. 被引量:59
  • 2Ensinger W and Wolf G K. Materials Science and Engineering A[J], 1989, 116:1
  • 3Lee D B, Jang Y D, Myung H S et al. Thin Solid Films[J], 2006, 506-507:369
  • 4Li Mingsheng, Feng Changjie, Wang Fuhui. Transactions of Nonferrous Metals Society of China[J], 2006, 16:s276
  • 5Dasgupta Arup, Premkumar P Antony et al. Surface and Coatings Technology[J], 2006, 201: 1401
  • 6Ichimura H and Kawana A. Journal of Materials Research[J], 1994, 9: 151
  • 7Hurkmans A, Lewis D B, Munz W D. Surface Engineering[J], 2003, 19:205
  • 8Li X Z, Zhang J, Sellmyer D J. Journal of Applied Crystallography[J], 2004, 37:1010
  • 9Hones P, Martin N, Regula M. Journal of Physics D[J], 2003, 36: 1023
  • 10Okafor I C I, Reddy R G Journal of Metals[J], 1999, 51:35

二级参考文献144

  • 1L.S.Wen,et al.[J].J.Mat Sci andTechnol.93.1984,14:289~293.
  • 2B.A.Movchan,et al.[J].Phys.Met.Metallogr.1969,28:83.
  • 3J.A.Rhornton.[J],Ann.Rev.Mat.Sci.1991,7:239.
  • 4R.Messier,et al.[J].J.Vac.Sci.Technol.1984,A2:500
  • 5L.S.Wen,et al.Proc.of the lst Int.Cont.on Plasma Surface Engineering[C],Sept.1988,19~23.Garmisch-Partenkirchen,ERG,PlasmaSurface Engineering,eds.E.Broszeit,W.D.Munz,H.Oechsher,K.T.Rie,G.K.Woy,DGM InformationsgesellschaftmbH,1989,V2:1041.
  • 6L.Hultman,et al.[J].J.Appl.Phys.1987,2:552.
  • 7T.Tagaki.[J],J.Vac.Sci.Technol.1984,A2:382.
  • 8L.S.Wen et al.[J].Surf Eng,1990,6:1,41.
  • 9Petrov,et al.[J]. Thin Solid Films,1989,169:299.
  • 10D.S.Rikerby et al.[J].Surf.Coat.Tech.,1989,39/40:355.

共引文献58

同被引文献38

  • 1李钦虎,王军.磁控反应溅射沉积CrN薄膜的抗氧化性研究[J].表面技术,2005,34(6):40-41. 被引量:16
  • 2李明升 冯长杰 王福会.电弧离子镀氮化铬涂层的沉积工艺研究.功能材料,2006,(37):792-795.
  • 3Kacsich T, Lieb K P. Oxidation of thin CrN and Cr2N films analyzed via nuclear reaction analysis and Rutherford backs scattering [J]. Thin Solid Films, 1994, 235: 4.
  • 4Lu F H, Chen H Y. Phase changes of CrN film annealed at h!gh temperature under controlled atmosphere [J]. Thin Solid Films, 2001,398-399:368-373.
  • 5Polear T, ParreiraN M G, Nov6k R. Friction and wear behaviour of CrN coating at temperatures up to 500C.Surface & Coatings Technology,2007,201:5228-5235.
  • 6Zhang Z G, Rapaud O, Bonasso N, et al. Control of mi- crostructures and properties of dc magnetron sputterin de- posited chromium nitride films. Vacuum, 2008,82 : 501 - 509.
  • 7Forni6s E, Escobar Galindo R, S6nchez O, et al. Growth of CrNx films by DC reactive magnetron sputtering at con- stant N2/Ar gas flow. SuoCace & Coatings Technology, 2006,200 : 6047 -6053.
  • 8Zhang G A, Yan P X, Wang P, et al. Influence of nitro- gen content on the structural, electrical and mechanical properties of CrNx thin films. Materials Science and Engi- ncering A, 2007,460-461 : 301-305.
  • 9Neves A M, Severo V, Cvrek L, et al. In situ structural evolution of arc-deposited Cr-based coatings. Surface & Coatings Technology,2008,202:5550-5555.
  • 10Rzepiejewska-Malyska K, Parlinska-Wojtan M, Wasmer K, et al. In-situ SEM indentation studies of the deforma- tion mechanisms in TiN, CrN and TiN/CrN. Micron, 2009,40:22-27.

引证文献6

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部