期刊文献+

PPP协议链路操作在无线嵌入式终端上的实现

PPP Protocol Realization of Data Link Operation in Wireless Embedded Terminal
下载PDF
导出
摘要 在远程无线实时监控中,基于GPRS网络的无线监控系统成为当前远距离无线监控领域最为广泛的应用。在这种方案中,PPP协议被作为链路控制协议使用。本文主要介绍如何在一个嵌入式终端中利用PPP协议实现与GPRS网络的链路协商,继而使终端能够附着在GPRS网络上,实现数据从无线终端经过GPRS网络最后到达Internet网络的目的。 As for data surveillance, the general packet radio service (GPRS) is the best candidate for always - on connection to any movement terminal. For the interconnection of the mobile terminal to an inter - working unit, a point to point protocol is required for data link operation protocol. In this paper, PPP protocol be planted into an embedded system. After a successful data link operation, the wireless monitor terminal can transmits data packets to server computer via GPRS network and Interact.
出处 《微计算机应用》 2007年第10期1053-1056,共4页 Microcomputer Applications
关键词 PPP协议 GPRS网络 嵌入式系统 PPP protocol, GPRS network, embedded system
  • 相关文献

参考文献3

  • 1W. Simpson, Ed.. The Point - to - Point Protocol (PPP). IETF RFC 1661,1994.
  • 2C. E. Lin, et. al.. A Real Time Remote Control Architecture using Mobile Communication. IEEE Trans. On Instrumentation and Measurement, 2003,52(4) :
  • 3Richard StevensW.TCP/IP详解,卷1.北京:机械工业出版社,2001.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部