摘要
介绍用三菱可编程控制器为主控设备的陶瓷基复合材料成型设备的机械结构、控制电路以及控制软件的设计。设备的工作流程由主控制器控制;搅拌电动机由变频器实现在20～150r/min内无级调速;成型器内部温度由固态继电器(SSR)控制,精度较高。
Introduces the mechanism, control circuit and control software designs of the ceramic matrix composites shaping equipment in which PLC is used as the main controller. The working process of the equipment is controlled by the main controller. The speed of rotation of the electromotor can be regulated from 20 - 150r/min by VVF. The temperature inside the shaping machine is regulated by SSR in a high accuracy.
出处
《现代制造工程》
CSCD
2007年第10期111-112,共2页
Modern Manufacturing Engineering
基金
江苏省高校省级重点实验室开放研究课题项目(KJS03022)
