期刊文献+

镁合金盒形件充液拉深液压力的研究 被引量:3

Research of Hydraulic Pressure during Hydromechanical Deep Drawing of Magnesium Alloy Box Parts
下载PDF
导出
摘要 用有限元模拟软件Marc对镁合金盒形件的充液拉深成形过程进行了数值模拟,讨论了液压力对成形的影响,得出了成形的比较理想的液压加载方式、最大液压力等参数. The forming process of hydro-mechanical deep drawing of the magnesium alloy box parts is simulated with the finite element analysis software-MSC. Marc. In this article , influence of hydraulic pressure on the forming is discussed, and some perfect parameters during forming process, such as the hydraulic pressure loading and the maximum hydraulic pressure, are obtained.
出处 《沈阳理工大学学报》 CAS 2007年第3期53-56,共4页 Journal of Shenyang Ligong University
关键词 充液拉深 液压力 有限元模拟 hydro- mechanical deep drawing hydraulic pressure finite element simulation
  • 相关文献

参考文献6

二级参考文献29

  • 1李尧臣.金属板材冲压成型过程的有限单元法模拟[J].力学学报,1995,27(3):351-364. 被引量:12
  • 2王圣平.汽车覆盖件成形过程数值模拟研究[J].塑性工程学报,1996,3(2):41-48. 被引量:11
  • 3S Yossifon,J Tirosh.The maximum drawing ratio in hydroforming process.J.Eng.Ind.Trans.ASME.February 1990,112:47~62
  • 4J Tirosh,A Shirizly,S Yossifon.On recent progress in deep drawing process by fluid pressure assisted methods.ICTP5,Columbus,Ohio,USA,Octorber 7-10,1996:707~782
  • 5F Vollertsen,R Breede,K Lange. A method for deep drawing with multiple elastomer membranes.Annals of the CIRP,1999,48(1):221~226
  • 6T G Johannison.Flexforming-high-pressure sheet metal forming,ABB Rev.1990,5:25~30
  • 7M Kleiner, etc.New 100000kN press for sheet metal hydroforming.Papers of International Conference on Hydroforming.Stuttgart,Germany,Nov.5-6,2001:351~362
  • 8H J Becher, G Bnesman.Further development in hydromechanical deep drawing.Developments in the Drawings of Metals on Metal Society of London,1983:272~278
  • 9E Buerk.Hydromechanical drawing.Sheet Metal Industries,1966,43(474):182~188
  • 10K Nakamura,T Nakagawa.Sheet metal forming with hydraulic counter pressure in Japan.Annal.CIRP,1987,36:191~194

共引文献77

同被引文献27

  • 1Lee Y S, Kim M C, Kim S W. Experimental and analytical studies for forming limit of AZ31 alloy on warm sheet metal forming [J] Journal of Materials Processing Technology, 2007, 187-188 (1): 103-107.
  • 2Yang I, F, Mori K I. Deformation behaviors of magnesium al- loy AZ31 sheet in cold deep drawing [J]. Transactions of Nonferrous Metals Soeity of China, 2008, 18 (1) : 86 - 91.
  • 3E1-Morsy A W, Manabe K I. Finite element analysis of mag nesium AZ31 alloy sheet in warm deep drawing process con sidering heat transfer effect [J]. Materials Letters, 2006, 60 (8) : 1866 - 1870.
  • 4Mao X C, Wang M G. Forming limit of magnesium alloy sheet in hydromechanical deep drawing [J]. Advanced Mate rials Research, 2012, 482 - 484 (2) .- 2086 - 2089.
  • 5Chen F K, Huang T B. Deep drawing of square cups with magnesium alloy AZ31 sheets [J] International Journal of Machine Tools : Manufacture, 2003, 43 (9): 1553-1559.
  • 6张文玉,刘先兰,陈振华.异步轧制AZ31镁合金板材室温冲压性能研究[J].塑性工程学报,2007,14(4):6-10. 被引量:13
  • 7LEE J B, KONNO T J, JEONG H G. Effect of differential speed rolling on the anisotropy of mechanical properties and texture evo- lution of AZ31 Mg alloys[J]. Journal of Alloys and Compounds, 2010, 499(2): 273-277.
  • 8FERRASSE S, SEGAL V M, KALIDINDI S R. Texture evolution during equal channel angular extrusion Part I. Effect of route, number of passes and initial texture[J]. Materials Science and En- gineering, 2004, A 368(1-2): 28-40.
  • 9REN L M, ZHANG S H, PAHUMBO G, et al. Numerical simu- lation on warm deep drawing of magnesium alloy AZ31 sheets[J]. Materials Science and Engineering, 2009, A 499(1-2) : 40-44.
  • 10ZHANG S H, ZHANG K, XU Y C, et al. Deep-drawing of mag- nesium alloy sheets at warm temperatures[J]. Journal of Materials Processing Technology, 2007, 185(1-3) : 147-151.

引证文献3

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部