期刊文献+

Effect of cooling modes on microstructure and electrochemical performance of LiFePO_4

Effect of cooling modes on microstructure and electrochemical performance of LiFePO_4
下载PDF
导出
摘要 LiFePO4 was prepared by heating the pre-decomposed precursor mixtures sealed in vacuum quartz-tube. Three kinds of cooling modes including nature cooling, air quenching, and water quenching were applied to comparing the effects of cooling modes on the microstructure and electrochemical characteristics of the material. The results indicate that the water quenching mode can control overgrowth of the grain size of final product and improve its electrochemical performance compared with nature cooling mode and air quenching mode. The sample synthesized by using water quenching mode is of the highest reversible discharge specific capacity and the best cyclic electrochemical performance, demonstrating the first discharge capacity of 138.1 mA·h/g at 0.1C rate and the total loss of capacity of 3.11% after 20 cycles. LiFePO4 was prepared by heating the pre-decomposed precursor mixtures sealed in vacuum quartz-tube. Three kinds of cooling modes including nature cooling, air quenching, and water quenching were applied to comparing the effects of cooling modes on the microstructure and electrochemical characteristics of the material. The results indicate that the water quenching mode can control overgrowth of the grain size of final product and improve its electrochemical performance compared with nature cooling mode and air quenching mode. The sample synthesized by using water quenching mode is of the highest reversible discharge specific capacity and the best cyclic electrochemical performance, demonstrating the first discharge capacity of 138.1 mA.h/g at 0.1C rate and the total loss of capacity of 3.11% after 20 cycles.
出处 《Journal of Central South University of Technology》 EI 2007年第5期647-650,共4页 中南工业大学学报(英文版)
基金 Project(50604018) supported by the National Natural Science Foundation of China
关键词 Li-ion battery cathode material LIFEPO4 cooling mode MICROSTRUCTURE electrochemical performance 锂电池 阴极材料 LiFePO4 冷却模型
  • 相关文献

参考文献11

  • 1胡国荣,高旭光,彭忠东,陈召勇,谭显艳,禹筱元.Synthesis of LiFePO_4/C composite electrode with enhanced electrochemical performance[J].中国有色金属学会会刊:英文版,2005,15(4):795-799. 被引量:3
  • 2NISHI Y.Lithium ion batteries: Past 10 years and the future[].Journal of Power Sources.2001
  • 3ZAGHIB K,STRIEBEL K,GUERFI A, et al.LiFePO4/polymer/natural graphite: Low cost Li-ion batteries[].Electrochimica Acta.2004
  • 4HUANG H,YIN S C,NAZAR L F.Approaching theoretical capacity of LiFePO4 at room temperature at high rates[].Electrochemical and Solid State Letters.2001
  • 5GUERFI A,KANEKO M,PETITCLERC M, et al.LiFePO4 water-soluble binder electrode for Li-ion batteries[].Journal of Power Sources.2007
  • 6HO C S,WON C,HO J.Electrochemical properties of carbon-coated LiFePO4 cathode using graphite, carbon black, and acetylene black[].Electrochimica Acta.2006
  • 7CHUNG S Y,BLOCKING J T,CHIANG Y M.Electronically conductive phospho-olivines as lithium storage electrodes[].Nature Materials.2002
  • 8HU Guo-rong,GAO Xu-guang,PENG Zhong-dong, et al.Influence of Ti ion doping on electrochemical properties of LiFePO4/C cathode material for lithium-ion batteries[].Transactions of Nonferrous Metals Society of China.2007
  • 9HONG Jian,WANG Chun-sheng,KASAVAJJULA U.Kinetic behavior of LiFeMgPO4 cathode material for Li-ion batteries[].Journal of Power Sources.2006
  • 10RAVET N,ABOUIMRANE A,ARMAND M, et al.On the electronic conductivity of phospho-olivines as lithium storage electrodes[].Nature Materials.2003

二级参考文献21

  • 1Prosini P P, Zane D, Pasquali M. Improved electrochemical performance of a LiFePO4-based composite cathode [J]. Electrochim Acta, 2001, 46: 3517-3523.
  • 2Huang H, Yin S C, Nazar L F. Approaching theoretical capacity of LiFePO4 at room temperature at high rates [J]. Electrochem Solid State Lett, 2001,4:A170 - A172.
  • 3HU Guo-rong, ZHANG Xin-long, PENG Zhongdong, et al. Synthesis and characterization of LiFePO4/C composite as lithium storage electrodes [J].Trans Nonferrous Met Soc China, 2004, 14(2): 237- 240.
  • 4Bard A J, Faulkner L R. Electrochem Methods:Fundamental and Applications [M]. New York: Wiley, 1980. 224.
  • 5CHEN Zhao-hui, Dahn J R. Reducing carbon in LiFePO4/C composite electrodes to maximized specific energy, volumetric energy, and tap density [J].J Electrochem Soc, 2002,149: A224 - A229.
  • 6Huang H, Yin S C, Nazar L F. Approaching theoretical capacity of LiFePO4 at room temperature at high rates [J]. Electrochem Solid State Lett, 2001,4: A170- A172.
  • 7Padhi A K, Najundaswamy K S, Goodenough J B.Phospho-olivines as positive-electrode materials for rechargeable lithium batteries [J]. J Electrochem Soc,1997, 144: 1188- 1194.
  • 8Iltchev N, CHEN Yi-ke. LiFePO4 storage at room and elevated temperatures [J]. J Power Sources, 2003,119 - 121: 749- 754.
  • 9Zaghib K, Striebel K, Guerfi A, et al. LiFePO4/polymer/natural graphite: low cost Li-ion batteries [J].Electrochimica Acta, 2004, 50(2-3): 262-269.
  • 10YANG S, SONG Y, Zavalij P Y, et al. Reactivity,stability and electrochemical behavior of lithium iron phosphates [J]. Electrochem Comm, 2002, 4:239 -244.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部