期刊文献+

稀土强化Al_2O_3/Ti(C,N)陶瓷材料的热震与高温氧化行为研究 被引量:1

Thermal Shock and High Temperature Oxidation Behaviors of Rare Earth Strengthened Al_2O_3/Ti(C,N) Ceramic Materials
下载PDF
导出
摘要 以稀土强化Al2O3/30vol%Ti(C,N)/0.5vol%Y2O3陶瓷材料为基础,进行了材料的热震与高温氧化行为研究,并采用SEM、XRD进行微观结构特征和物相分析。结果发现,该材料具有良好的抗热震性能与抗氧化性能。微观结构观察发现,热震损伤的主要形态是晶粒脱落、不同形状纵横交错的微观与宏观裂纹。约在900℃时材料开始发生轻微氧化,速度较慢,而在1200℃时氧化加剧。所形成的氧化产物TiO2,可以在材料表面形成氧化膜,阻止材料进一步的氧化。 Based on the rare earth reinforced Al2O3/30vol% Ti ( C, N)/0.5vol% Y2O3 ceramic material, thermal shock and high temperature oxidation behaviors have been carried out. SEM and XRD are used to perform the microstructural characterization and phase analysis of the material, Results show that the developed ceramic material has good thermal shock resistance and high temperature oxidation resistance. It indicates from the microstructural observation that thermal damage forms mainly include the peeling off of grains, micro and macro crisscross cracks of different shapes. The material begins to be oxidized slightly nearly from 900℃ with low oxidation speed. The oxidation is intensified at 1200℃. The oxidation product is TiO2 which can prevent further oxidation of the material through the formation of oxidation layer in the surface of the ceramic material.
出处 《人工晶体学报》 EI CAS CSCD 北大核心 2007年第3期687-691,共5页 Journal of Synthetic Crystals
基金 国家自然科学基金(No.50405047) 山东省自然科学基金(Y2005F04) 济南市青年科技明星计划(No.08108)
关键词 陶瓷材料 稀土 氧化铝 热震 氧化 ceramic material rare earth alumina thermal shock oxidation
  • 相关文献

参考文献10

  • 1Kingery W D.Factors Affecting Thermal Shock Resistance of Ceramic Materials[J].J.Am.Ceram.Soc.,1955,38(1):3.
  • 2Hasselman D P H.Elastic Energy at Fracture and Surface Energy as Design Criteria for Thermal Shock[J].J.Am.Ceram.Soc.,1963,46(11):535.
  • 3Hasselman D P H.Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics[J].J.Am.Ceram.Soc.,1969,52(11):600.
  • 4Lutz E H,Swain M V.Fracture Toughness and Thermal Shock Behavior of Silicon Nitride-nitride Ceramics[J].J.Am.Ceram.Soc.,1992,70(1):75.
  • 5Jin Z H,Mai Yiuwing.Effect of Damage on Thermal Shock Strength Behavior of Ceramics[J].J.Am.Ceram.Soc.,1995,73(7):1873.
  • 6Koh Y H,Kim H W,Kim H E.Mechanical Properties and Oxidation Resistance of Si3N4-SiC Nanocomposites[J].Scrip.Mater.,2001,44(8-9):2069.
  • 7Maghsoudipour A,Moztarzadeh F,Saremi M,et al.Oxidation Behavior of AlN-Al2O3 Composites[J].Ceram.Int.,2004,30(5):773.
  • 8Xu Chonghai,Ai Xing,Huang Chuanzhen,et al.Strengthening and Toughening Effect of Yttrium on Al2O3/TiCN Ceramic Tool Material[J].J.Rare Earths,2000,18(1):73.
  • 9Chonghai Xu.Preparation of Ceramic Tool Materials Containing Rare Earth Additive[J].Modeling,Measurement and Control A,(accepted).
  • 10许崇海,慈国庆,商锡佐.稀土强化Al_2O_3/Ti(C,N)陶瓷材料的组分设计及其使用性能研究[J].人工晶体学报,2007,36(2):400-404. 被引量:7

二级参考文献8

  • 1包亦望,金宗哲,孙立.脆性的定量化和冲击模量[J].材料研究学报,1994,8(5):419-423. 被引量:8
  • 2Evans A G. Perspective on the Development of High Toughness Ceramics [J]. J. Am. Ceram. Soc., 1990, 73(2) : 187.
  • 3Steinbrech R W. Toughening Mechanisms for Ceramic Materials[J]. J. Eur. Ceram. Soc. , 1992, 10(3) : 131.
  • 4Xu C H, Ai X. Particle Dispersed Ceramic Composite Reinforced with Rare Earth Additions [J]. Inter. J. Refract. Metal Hard Maters, 2001, 19 (2) : 85.
  • 5Mori T, Tanaka K. Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions [ J ]. Acta Metall. , 1973, 21( 3 ) : 571.
  • 6Levin V M. Thermal Expansion Coefficient of Heterogeneous Materials [J]. Mekhanika Tverdogo Tela. , 1967, 2( 1 ) : 88.
  • 7许崇海,艾兴,邓建新,黄传真.稀土元素在氧、碳、硼化物陶瓷材料中的应用研究[J].硅酸盐通报,1998,17(3):64-68. 被引量:26
  • 8郭景坤.关于先进结构陶瓷的研究[J].无机材料学报,1999,14(2):193-202. 被引量:54

共引文献6

同被引文献12

  • 1Chonghai Xu,Chuanzhen Huang,Xing Ai.Mechanical property and cutting performance of yttrium-reinforced Al2O3/Ti(C,N) composite ceramic tool material[J]. Journal of Materials Engineering and Performance . 2001 (1)
  • 2Chen -Tsu Fu,Jenn -Ming Wu,Ai -Kang Li.Microstructure and mechanical properties of Cr3C2 particulate reinforced Al2O3 matrix composites[J]. Journal of Materials Science . 1994 (10)
  • 3Fu Y,Gu Y W,Du H.SiC whisker toughened Al2O3- (Ti,W)C ceramic matrix composites. Scripta Materialia . 2001
  • 4Rak Z S,,Czechowski J.Manufacture and properties of Al2O3-TiN particulate composites. Journal of the European Ceramic Society . 1998
  • 5Acchar W,Greil P,Martinelli A E.Effect of Y2O3 addition on the densification and mechanical properties of alu- mina-niobium carbide composites. Ceramics International . 2001
  • 6Zhao S K,Xu C H.Effects of CeO2 on the mechanical prop- erty and microstructure of 3Y-TZP nanocomposite ceramic die material. Key Engineering . 2010
  • 7Ki-Woong CHae,Doh-Yeon Kim,Byung-Chan Kim,et al.2</sub>O<sub>3</sub> additions on the densification of an Al<sub>2</sub>O<sub>3</sub>-TiC composite&amp;sid=Journal of the American Ceramic Society&amp;aufirst=Ki-Woong CHae');&#xA; ">Effect of Y<sub>2</sub>O<sub>3</sub> additions on the densification of an Al<sub>2</sub>O<sub>3</sub>-TiC composite. Journal of the American Ceramic Society . 1993
  • 8AiXing,LiZhaopian,Deng Jianxin.Development and ??perspective of advancde ceramic cutting tool materials.KeyEngineering Materials, Trans. Tech. Publication . 1995
  • 9A. Senthil Kumar,A. Raja Durai,T. Sornakumar.Development of yttria and ceria toughened alumina composite for cutting tool application. International journal of refractory metal and hard materials . 2007
  • 10Barry,J,Byrne,G.Cutting tool wear in the machining of hardened steels - Part I: alumina /TiC cutting tool wear. Wear . 2001

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部