摘要
分析了等半径圆弧过渡曲面成形刀纵向加工干涉产生的原因，并将其分为横向和径向两种干涉。给出了它们的判断准则和不产生这两种干涉的最大刀径计算方法。
lt has been found difficult to avnid the interference during the machining of arcc blends of e- qual radii with forming cutters in the longitudinal direction. The interference can be classified into two categories , that in the transverse direction and that in the longitudinal direction. The mechanism of occurrence of interference is discussed and the criteria for distinguishing between the two kinds of in- terference as well as the method of calculating the maximum diameter of the cutter in order to avoid interference are proposed.
出处
《华中理工大学学报》
CSCD
北大核心
1997年第4期47-49,共3页
Journal of Huazhong University of Science and Technology
基金
国家高技术研究发展计划CIMS应用工厂项目
