期刊文献+

损伤容限型钛合金TA15 ELI 43mm厚板组织与性能 被引量:1

Microstructure and Properties of Damage Tolerance TA15 ELI Alloy 43 mm Plate
下载PDF
导出
摘要 研究了TA15 ELI合金43 mm厚板双态组织和片层组织的室温拉伸性能、断裂韧性KIC以及疲劳裂纹扩展速率da/dN等损伤容限性能,讨论了显微组织对该合金损伤容限性能的影响。结果表明,相对双态组织而言,该合金片层组织在较少损失拉伸强度的前提下,提高了合金的断裂韧性,降低了合金的疲劳裂纹扩展速率,具有更好的损伤容限性能。 The microstructures and properties of TA 15 ELI alloy 43 mm plates with bi-model and lamellae microstructure were investigated. Two different heat treatments were performed. The results of tests, including tensile, fracture toughness and fatigue crackpropagation, showed that the plate with lamellae microstructure had higher fracture toughness and fatigue crack propagation resistance, with the similar tensile strength to bi-modal microstructure.
出处 《稀有金属》 EI CAS CSCD 北大核心 2007年第5期709-711,共3页 Chinese Journal of Rare Metals
关键词 TA15 ELI 疲劳裂纹扩展速率 断裂韧性 损伤容限 TA15 ELI alloy fatigue crack propagation fracture toughness damage tolerance
  • 相关文献

参考文献9

二级参考文献39

  • 1[3]吴学仁主编.飞机结构金属材料力学性能手册,第二卷(损伤容限).北京:航空工业出版社,1996
  • 2[4]Pearson H S, Pachman P F. Fracture Prevention and Control. Calif. : Los Angeles, 1972:21
  • 3[5]Tuppor N G. Fracture Prevention and Control. Calif. :Los Angeles, 1972:159
  • 4[8]Rolfe S T. ASM Seminar on Fracture Control. Philadelphia: 1970
  • 5[9]Shults J M. SAE 730884. 1973
  • 6[13]Journal of Aircraft, 1974; 3
  • 7[14]AMS 4905A, U.S.A: Society of Automotive Engineers,1988
  • 8[15]Ferguson R R, Berryman R G. AFML-TR-76-137, vol.1.Rockwell International: Los Angeles, 1976
  • 9[16]Harigan M J, Kaplan M P, Sommer A W. Fracture Prevention and Control. Calif.: Los Angeles, 1972: 225
  • 10[17]Alloy Digest of TIMETAL 622. Orange, U.S.A: TIMET,1993

共引文献176

同被引文献44

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部